Jump to content
SAU Community

Recommended Posts

Heaps of room between guard and tyre. Surprised you have to roll guards MiK

oh and I'd stay with 235's. Federals are almost an inch wider than any other tyre.

Definitely no more than 245's

Edit: In fact I'd stick with what you have. Perhaps put some king or lovell springs in to drop it down a bit :yes:

( I run 255's on the GTR that have been rolled)

Edited by Sinista32

Its getting close to all working together.

The diff is the last big thing to fix.

Im getting really keen to fix it now, its just spending that much, i dont want to get it wrong.

The first ones had the wrong ends, for GTR, they had to get different bottoms sent.

Oil / Filter Change seems to be the order of the day! Tick. :yes:

About to WASH 2 cars... Then drive.

You did your own Water pump and TIMING BELT? I'm Not game to do the Timing belt. :O

Nice Mik if you want to get 255 you might need a 30 or 35 profile. I love the RSRs i have not managed to get them to slip yet. Pushing super hard around corners.

Oil / Filter Change seems to be the order of the day! Tick. :yes:

About to WASH 2 cars... Then drive.

You did your own Water pump and TIMING BELT? I'm Not game to do the Timing belt. :O

its not really hard as what people think just time consuming to get there.

I found it easy too.

The hardest bit was not making a mess with the goo on the new water pump.

Might be a pain with an auto as you cant lock the crank by putting it in gear.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...