Jump to content
SAU Community

Recommended Posts

You don't shit where you eat from 5hiv. So is it the AC compessor gone?

haha

Yes the AC compressor is dead. I knew that was the problem could have just cut the belt off and drove around with no AC

  • Like 1

Today...

Swapped my Spare ECU into the Wags. (didn't fix the Intermittent Fuel Pump Priming) :(

Replaced a Green Relay in Behind the ECU which apparently pretty much controls everything. (May have fixed the priming issue) :)

Chucked in 2 spare Old Coolant Temp Sensors. (bled the air out)

Cleaned the AFM. (again)

Pulled out and cleaned the O2 sensor.

Tightened a couple of Rocker Cover Screws. (near Exhaust Manifold)

Removed the Exhaust Manifold Heat Shield and found the main Exhaust leak. (Pretty sure there should be bolts in these holes) :/

post-78856-0-52438200-1389952133_thumb.jpg

More jobs for the thread repair guy

Just make a list, get them all fixed at the same time, so its only one callout fee.

Did nothing to mine today.... too hot, later tonight when the little terror is asleep, ill take off the rear bar, tailights, do the last of the vynil stripping and the door rubbers have to be carefully removed.

Then its ready for final clean and de-waxing, especially the edges and where the rubbers were.

The list of sht to do, to prep it for paint is very long. Lets see how far i get before the missus realizes what im doing. :w00t:

Edited by D.I.Y. Mik

Tried to reduce scrubbing.. Tend to get a little bit on crappy roads... :( Moulded the front splash guards with a heat gun. Raised the rear of the car about 5mm.. Was going to wash it but I think its going to rain at some stage over the next 24 hours.. Fingers crossed anyway :yes:

Detailing the Swift - Typical bloody thunderstorm then hail ! (x2)

Had GTR up the top with the 34.

Started to rain, then hail. First put a doona over the GTR bonnet then Kicked swift out of garage and moved the GTR just as the 2nd hail storm hit.

Was over quick. Shuffling cars what a pain.

Also had Shawty's magna here trying to fix the rear drivers side window. Wont go up. Had to tape garbo bags over it.

Did this a couple of days ago

1560574_10151910800431699_673939638_n.jp

1544335_10151909913986699_1494250941_n.j

good work man! looks nice :)

today I changed the plugs and cleaned the vallycover/rockercovers :)

post-127489-0-99190500-1390102400_thumb.jpg

plugs 1 through to 6, kind of glad I changed them!

they look a ton worse in person :|

Thanks man,

Today.....

Pumped front and rear guards.

Changed front pads

Raised front suspension up 10mm

Bled brakes

Discovered 265 tyres on 10" rims fit inside pumped front guards

Still have soft brake pedal :(

Time to have fluid changed and pressure bled.

Agree with above. Soarer looks Tough! What are those wheels + sizes etc...?

Today SkyWagStag got her much needed new thermostat and Coolant after a good hose flushin'. :D But now my temp gauge in the cluster doesn't work. :(

Also played more AAC, TPS, Throttle stop adjust games and may have hit the sweetspot. No more chugga lugga when floored from a standing start.

Woot! I tells ya.

While out in the 33 I had some Dude in an Audi SUV thing rip past me in Fury as my relatively cheap old Skyline formed one lane before him. :nyaanyaa: Sucker.

Agree with above. Soarer looks Tough! What are those wheels + sizes etc...?

Today SkyWagStag got her much needed new thermostat and Coolant after a good hose flushin'. :D But now my temp gauge in the cluster doesn't work. :(

Also played more AAC, TPS, Throttle stop adjust games and may have hit the sweetspot. No more chugga lugga when floored from a standing start.

Woot! I tells ya.

While out in the 33 I had some Dude in an Audi SUV thing rip past me in Fury as my relatively cheap old Skyline formed one lane before him. :nyaanyaa: Sucker.

18x10 +22 on the back, same size to go on the front soon, tyres are 265/35

Fronts in that pic are 17x9 +40s

I got overtaken down the near Uriarra by a silver one like 40 mins ago, I was doing about 105kph, Id hate to know how quick he was going.. never saw him come up behind me

and got some photos of the car :)

post-127489-0-01208400-1390120849_thumb.jpg

Hey guys. Just in Philip. Walking into the walk on center I locked my car and noticed that my indicator light is blown... is the bolb the same a s the headlight? If not dies anyone know what product code it is? Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...