Jump to content
SAU Community

Recommended Posts

Still removing paint.

Just needs the window frame edges cleaned up. I can sand very close, but theres still a line of paint. Waiting for mini soda blaster for that and plastics.

So it will be totally bare and clean before etch primer.

Go see John at Trojan Motorsports. He has 3 stags out there at the moment.

2 he just got and the 3rd is his daily.

He may be able to help :thumbsup:

Thanks mate, will do. :)

Just spoke to John, taking it in next wednesday to get everything looked at/sorted.

Cheers for the tip. :)

All traces of paint gone (where im gong to spray) original nissan primer is tough stuff, edges done, panel beating done.

A quick wash and wipe with prepsol then its ready for body filler and etch primer.

Never used good body filler before, always was cheap sht. I used to dread the bog sanding.

I love pro body filler! :banana:

Its so easy to work with and edges feather nice.

Now i feel free to shape it as i please.

The rear guard is fully covered again, when i started to bash it out i realized its been work hardened, and about to tear and split. Its had all the bashing it can handle.

So it has to be re bogged, i dont feel confident cutting it out and welding in a new bit. If i could find a new bit.

Added a little touch to the door cards....

Credit goes to RBn1 and his build as this was his idea:

attachicon.gifIMG_20140223_111732.jpg

did not want to say anything in his thread but

had mine done for over 10yrs. Time to redo it :P

but yes it looks the shiz

(wait till you put a mini coloured fluro in it that comes on when you open the door :whistling: )

did not want to say anything in his thread but

had mine done for over 10yrs. Time to redo it :P

but yes it looks the shiz

(wait till you put a mini coloured fluro in it that comes on when you open the door :whistling: )

i see no proof of this. =D

Ive just ordered a whole heap of stuff for the GTR including full LEDs for all the lights. Can't wait till they get here.

please don't use paint anywhere on the door panels

(my inserts used to be silver, so was the cluster surround, and gearstick A/C surround)

good for it's day but got dated quickly

please don't use paint anywhere on the door panels

(my inserts used to be silver, so was the cluster surround, and gearstick A/C surround)

good for it's day but got dated quickly

Nah no paint or anymore CF and very little lights. Need more moneys first though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...