Jump to content
SAU Community

Recommended Posts

Over the weekend, for Skywagon I made an exhaust shield for the Extractors. (Doubles as a BBQ.)

post-78856-0-90750700-1393234002_thumb.jpg

I also tinted the indicators. (way too dark)

post-78856-0-66564500-1393233984_thumb.jpg

and installed some New Bonnet stops as per Ebay again ---> http://www.ebay.com.au/itm/330892988661?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

Today on the 33 I replaced my Pedders Shocks & Stock Springs with other Pedders Shocks and NISMO Springs. :woot:

post-78856-0-70844800-1393233999_thumb.jpg

Harder Ride and 10mm lower.

(feels so Boy Racer Driving round with no back seat and lots of extra fuel pump and exhaust noise.) :woot:

  • Like 1

After messing round with castor arms on the Wags and finding 2 different size bush spacer dealies in there, I put 2 same size ones in.

Got a Re alignment this arvo and suddenly my steering wheel is straight and much less Tramlining. :woot: Much Better.

Received in the mail today (All from 1 Ebay seller)...

2 RB30 AFMs, 1 Coil, Brand New Eagle Sparkplug Leads and a 12 pack of New KLG Sparkplugs.

Installed LED Rear brake lights, Indicators and number plate lights... The color in the brakes and indicators is so much more vibrant. Looks better than new!

post-92069-0-50929600-1393411484.jpg

So finally i got my car running now time to get it tuned and also does anyone knows how much will it cost to get all my exhaust studs replaced.

post-72907-0-56590400-1393490257_thumb.jpg

Just waiting on some hoses and then i will tidy all the hoses

you can go to speciality fasteners they have good stuff. You can probably do it yourself if you do it slow. If you snap any buy a reverse drillbit about half the size the diameter for the bolt. soak it in release agent a few days before you remove it but you cant drive coz it'll heat it up again.

Installed a blitz return flow today. Great kit, real easy to install. Only cutting required was some trimming of the front bar

Oooh.. Nice Work. :D

How's it feel to drive? More power? Response slower or not?

I felt a big difference in power / airflow when I put in the R34 GTT smic after the stocker...

Changing from the GTT to the ARC smic was not so noticeable.

Oooh.. Nice Work. :D

How's it feel to drive? More power? Response slower or not?

I felt a big difference in power / airflow when I put in the R34 GTT smic after the stocker...

Changing from the GTT to the ARC smic was not so noticeable.

Year I think maybe I've lost a bit down low, gained a little mid range but it's definitely freed up top end.

Another supporting mod done. Been talking to dvs Jez lately, hopefully POWER :woot: isn't too far away :D

  • Like 1

Nice work Chris

you can go to speciality fasteners they have good stuff. You can probably do it yourself if you do it slow. If you snap any buy a reverse drillbit about half the size the diameter for the bolt. soak it in release agent a few days before you remove it but you cant drive coz it'll heat it up again.

Will give that a try maybe next in line and if not then just give it to a exhaust shop to do it.

Today i tidy the engine bay a little and got rego :banana:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
    • 300kW is so boring in a Skyline, you'll get spanked by someone's mum's Golf with Alibaba pipes, and an email tune.
×
×
  • Create New...