Jump to content
SAU Community

Recommended Posts

Rob is the master of motivation. :worship:

If only this was true. ^^^ Too many things around here I can't get motivated to deal with.

I do car things to avoid them. :laugh:

Good Stuff Chris! When is the Tune Happening?

I got motivated enough to do a Green Waste Run.

This is one reason why we SkyWagon. (excuse the MDF Dust on the phone lense pic)

post-78856-0-30875400-1400397443_thumb.jpg

Then played cars again starting with vacuuming out the Green Waste mess.

Been meaning to Remove the Towbar cooz don't need it, so I did that.

In the process, I had to remove the Muffler and finally Heard the RB growl within for the first time. :woot:

Gave me a tingle so I did a Muffler off / Muffler on Comparison. (I know which one I like)

Cut and Shaped some Perspex to add to my previous Clear indicator efforts.

(Perspex over Fluro Diffuser with orange Bulbs)

and did some dodgy No No Paint Touchups on a few chips.

post-78856-0-93606100-1400397657_thumb.jpg

Wired in z32 AFM harness. All set for the tune now!! So keen!!! :D

NIce whos tuning it

I might need your help with wring my z32 soon

Good Stuff Chris! When is the Tune Happening?

I got motivated enough to do a Green Waste Run.

This is one reason why we SkyWagon. (excuse the MDF Dust on the phone lense pic)

attachicon.gifGreen Waste.jpg

Then played cars again starting with vacuuming out the Green Waste mess.

Been meaning to Remove the Towbar cooz don't need it, so I did that.

In the process, I had to remove the Muffler and finally Heard the RB growl within for the first time. :woot:

Gave me a tingle so I did a Muffler off / Muffler on Comparison. (I know which one I like)

Cut and Shaped some Perspex to add to my previous Clear indicator efforts.

(Perspex over Fluro Diffuser with orange Bulbs)

and did some dodgy No No Paint Touchups on a few chips.

attachicon.gifSkyWagon Clear Indicators.JPG

So thats what you were busying doing in the garage this weekend

Yup! Just about everytime you drove past, I was tinkering with something. ;)

:thumbsup:

One of my light was off so i tried to adjust it but turned to much and it came off the bolt inside which adjusts the light up and down

I had to open my light and put this little plastic thing that acts like a nut inside

post-72907-0-54891900-1400403468_thumb.jpg

Edited by 5hiv

Good Stuff Chris! When is the Tune Happening?

This Saturday! :woot:

NIce whos tuning it

I might need your help with wring my z32 soon

DVS Jez.

Yeah man it's pretty straightforward but if you want a hand just let us know :)

This Saturday! :woot:

DVS Jez.

Farq Yeah! Should be sweet.

Next Wakey day could be interesting.

Do you have a power figure in mind you will be happy with?

240kw + ???

Farq Yeah! Should be sweet.

Next Wakey day could be interesting.

Yeah pretty keen to organize another day after the tune. Would be good with the colder weather too.

Yeah I'd be happy with anything 240+. Jez reckons might be able to get 250-260 though. So we'll see how we go :D

Edited by dontyellpl0x

When I get back I'm stripping the SS1PU out of the 33 and sending it to hypergear for a quick fresh up to his new specs and then it's going into the r34 :)

Should crack the magic 300 with e85

DVS will probably end up tuning mine as well because he put so much effort into my 33 and now he has a heap load more experience

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...