Jump to content
SAU Community

Recommended Posts

Will 17" rims fit over the brakes on an R34 GTR?

I'm after a spare set of wheels to put on the car for wheel alignments etc or maybe with some race tyres fitted.

I've just had the standard rims (18") repaired/repainted and don't want to knock them about.

Can anyone recommend some cheap rims I could purchase to replace the stockers for wheel alignments etc?

regards

Andrew

Link to comment
https://www.sau.com.au/forums/topic/41582-17-rims-for-r34-gtr/
Share on other sites

Thanks for your reply Maxx,

I suspected as much but that gold paint (on the callipers) had me fooled.

regards

Andrew

the brake of R34 and 33 are the same, so 17" rims should fit yr car nicely.

check out those buddy club P1 in GB section, pretty cheap for such high quality light weight rims.

or go for 33 GTR wheels

the brake of R34 and 33 are the same, so 17" rims should fit yr car nicely.

check out those buddy club P1 in GB section, pretty cheap for such high quality light weight rims.

or go for 33 GTR wheels

The gold R34 GTR brembo calipers are not the same as the R33 GTR brembo calipers. Alot of 17" wheels will NOT clear the front R34 GTR brembo brakes. You would be best off confirming the "X-factor" of the wheels before you buy them to make sure they will clear the brake calipers.

Have to see how I go - may have some cheap second hand wheels for sale in the next week or two!!

regards

Andrew

The gold R34 GTR brembo calipers are not the same as the R33 GTR brembo calipers.  Alot of 17" wheels will NOT clear the front R34 GTR brembo brakes. You would be best off confirming the "X-factor" of the wheels before you buy them to make sure they will clear the brake calipers.

Why not just tell the wheel alignment place that you just had the wheels refurbished, and if they scratch them, they'll have to pay for repainting them?

Would be a lot easier than buying a whole new set of wheels just for wheel alignments!!

The gold R34 GTR brembo calipers are not the same as the R33 GTR brembo calipers.  Alot of 17" wheels will NOT clear the front R34 GTR brembo brakes. You would be best off confirming the "X-factor" of the wheels before you buy them to make sure they will clear the brake calipers.

interest to know what's the different between R33 & R34 GTR brake instead of color.

i do see them real in my hand they are the same.

Why not just tell the wheel alignment place that you just had the wheels refurbished, and if they scratch them, they'll have to pay for repainting them?

Would be a lot easier than buying a whole new set of wheels just for wheel alignments!!

Good theory if you live in Sydney and have numerous wheel alignment places to choose from. Theres one place within a 150km radius of where I live (central Tablelands NSW) which has the right gear to do a four wheel alignment and who I would trust to do it properly.

Yes, I have talked to them about the wheels being refurbished and that I didn't want them scratched etc. They were reasonably confident than they could do it without scratching them but wanted to check them first and woudn't do the job if they couldn't guarantee no scratches.

I've been thinking about getting a second set for track tyres anyway so thought I would kill two birds with one stone - hence my post.

I thought it was a simple question - thanks for your comments anyway.

regards

Andrew

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...