Jump to content
SAU Community

Recommended Posts

Hey all im new to the RWD side of the car, iv owned afew rwd in the past but most of my past rides have been hondas

atm my current ride is a 1992 honda prelude f22

i got this car about 18months ago as nothing but i shell and managed to rebuild in to what it is today

afw mods i have on the car are,

body kit

shaved boot lid

halo head lights

clear tail lights adj sleeved springs

the motor is an stock f22 but as we speak i have a new f22 being built for it. its a fully forged 2.2ltr with a stage 2 turbo cam, upgraded springs, vavles, retainers, and guides ect ect

its runninf twin walbro 255s with nos and a t04e good for about 600hp all running off a hondata

with a little luck once i got the new motor in i would be happy if i can manage 350-400hp atw @ 15-20psi

here a few pics of what i started with to where i am now

SANY0300.jpg

SANY0270.jpg

SANY0261.jpg

and this is where i am now

photo1_zps3056e244.jpg

photo_zpsde3a109e.jpg

now i know some of you are prob wondering WTF is this guy banging on about? this is a nissan spot not a honda spot......

well over the next few weeks im going to be on the hunt for an R34 shell to start on and do it all over again, and would reall be greatful

for any advide you lads can give me or questions i might have,

the plan is to build a proper drift spec 34 that will get used and not just sit there and look good parked up.

so i guess the first question i have is.........

is there anything i should be aware of or be on the look out for while looking for a shell, parts or even suggestions on what parts to use that wont shit its self after one run.

and befor anyone ask, yes i do understand this is not going to be a cheap project...........(just dont tell my misses, she thinks the turbo for my honda is part of the aircon lol)

thank any help would be great

Link to comment
https://www.sau.com.au/forums/topic/416540-hello-from-qld/
Share on other sites

Have you drifted before?

If not I'd be getting a cheap R32 thats already running with a RB25 in it, (Or just get an R33 GTSt since theyre just as cheap but newer) add a FMIC, Oil Cooler and steel wheeled turbo, weld the diff up and go and learn to drift in it.

You are very likely to keep bending things, and the cost to build a car from shell/rolling chassis most of the time is more expensive then buying individual parts.

It's why a lot of guys are parting out their R33s as they are getting more money for them in parts. Plus if you decide you want to put in a new part, you've got the old one to either sell, or keep as a spare (What I recommend) for if/when it breaks.

Link to comment
https://www.sau.com.au/forums/topic/416540-hello-from-qld/#findComment-6687460
Share on other sites

yeah i have drifted befor, its been a few years, but my last drift car was a vt gts 5.7lt 6spd man with a charger but i dont plan on doing this over night its just going to be over time and the way i see it, if i smash a 32 or a 33 its still going to have to be fixed if it were a 34, and on the plus side i know a thing or two about doing body work on cars, i used to work for a body kit shop doing alot of repairs on drift damage and also build wide bodys

Link to comment
https://www.sau.com.au/forums/topic/416540-hello-from-qld/#findComment-6687473
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...