Jump to content
SAU Community

Recommended Posts

Hey not sure if this is a topic but I desperately need help.

Ill try to keep it short but basically have a '94 R33 coupe series 1 with a sunroof :) only had her for a few months, bought from a lebanese guy....this is both me nd my partners dream car...so we cleaned her up, black bonnet, sound system etc. he did not look after her at all. We had a good run then problem after problem started.

PROBLEM #

1. Rocket cover leaking - fixed it

2. Hicas light only comes on once the car has been started then turned off for a short period of time. If let for roughly an hour it stays off (still not fixed)

3. Clutch started to squeak nd a tiny plastic bit just fell to the floor inside the car one day (still squeaking but clutch works perfect althought a bit sticky)

4. Driving nicely nd heard this noise like say a dragon flys wings right near ur ear. Tow trucked it home, pulled it all apart harmonica balancer is a bit thrashed out nd the 2 keys that hold it it place nd the crank pulley pretty much weren't there. Aparentl a ceased aircon system can cause it? Replaced those, put her all back together (first didn't even want to start timing woz out, lined all the notches up nd she started) now took her for a run bit sluggish but she still drove, boost leak? Fixed all of them (who ever came up with the 6piece intercooler pipe system should be shot!) cool she ran better nd better with every tweak. Got home turned her off nd there woz with weird bubbling noise coming from the back of the motor my partner thought it woz bottom end but we never bled the radiator system so I thought mayb airbubles. But the tapping/knocking noise is still their i figured it woz the harmonica balancer against the timing case since it looks a bit wonky wen she idles but as the revs pick up the straightens out, it's not a whole heap but just enough for u to notice. Good old YouTube nd partner reckons the noise is definitely death knock. I'm hoping its no or ill cry problem after problem can anyone shed some light coz I'm lost nd I really do not want to get rid of her or spend 3-4k on a rebuild! :'(

Link to comment
https://www.sau.com.au/forums/topic/416557-really-need-help/
Share on other sites

So you had it properly flow tested and made sure its up to the task by a professional?

Because they wear out and their flow rate slows down meaning they run the car but under full load they don't supply enough fuel, which leans the engine out and the bearings get hammered and you get a death knock

So you had it properly flow tested and made sure its up to the task by a professional?

Because they wear out and their flow rate slows down meaning they run the car but under full load they don't supply enough fuel, which leans the engine out and the bearings get hammered and you get a death knock

well no, but im 100% sure its fine coz she guzzles fuel fine (badly needs a tune) lucky to get 250 from a full tank....took her to the mechanics this morning and its coming from the timing cover near the bottom not the actualy engine which just confuses me that bit more

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello First, I apologize if this is not the correct forum. Let me know and I will move it to the correct one. I'm having a problem with the tachometer on my Skyline R33 with an RB25DET Neo engine. I'll tell you from the beginning. I'll tell you from the beginning. I have the RB25DET Neo engine installed in a Nissan Patrol GU, with a Link G4X control unit specifically for that engine,  and I have fitted a Skyline R33 tachograph to the original GU dashboard, but it doesn't work properly. I have the tachometer connected to the positive and negative terminals of the GU panel's wiring, and the signal cable is connected directly to the ECU output pin, but the rpm fluctuates widely. Can anyone tell me if the output signal from an R33 ECU is the same as the output signal from an R34 ECU, or if the voltage and signal type are different? Regards and thanks.  
    • I guess it was the thought about "Oh if I were to drive this everyday". Then no, SL500 I wouldn't really consider lmao. 
    • Yeah actually really fair point. Idk what I was thinking when looking at the SL500. Now that I think about it, I feel like I would have more enjoyment out of a shitbox that I would need to repair than some fancy merc. Although I must admit the SL500 does look quite nice. My bad hahaha.
    • 100% Also "Not wanting to spend money" is THE WORST IDEA IMAGINABLE when coming to a project car of any kind. They EXIST to BURN MONEY. Sure, gas money is a thing. A stock car with the worst fuel economy ever sold would probably be cheaper than modifying a car with FREE petrol for the life of your ownership of it, lol.
    • Amount of time you're being observed by law enforcement is so minute, that you could be a dumb shit 90% of your driving time, and never lose a demerit. You could also be the best driver ever and still get hit with a fine.   When you realise how quickly everything turns from "Wee, we're having fun!" To "oh f**k oh f**k oh f**k", you start to realise the only way to be a good driver, is to not be doing anything dumb or unexpected by normies on the road. You want to go fast, go to the track. Someone there in a 1990s slow POS will also show you how bad of a driver you are as they lap 10 seconds per lap quicker than you can in a car that should be considerably faster.
×
×
  • Create New...