Jump to content
SAU Community

R34 Gtt Shopping List - Wtb Bits And Pieces

darksky34

By darksky34,
in New South Wales

 Share

Recommended Posts

darksky34 Mentor

darksky34

Posted
Posted

hey all. I already have a thread for this in the WTB section but thought I'd put it in the NSW section too since that might make it easier if anyone here has pieces. Mods if this belongs ONLY in the WTB section then feel free to delete the thread.

Basically, got my car, have a few bits and pieces - mainly cosmetics that I want to fix up. Here's the list. Located in Sydney, NSW around Hornsby area so am willing to drive a bit to pick up (would have to be weekends) but otherwise am also willing to pay postage - depends how much it costs.

Have had some offers but still waiting on pics etc.

  • Armrest centre console lid - my hinge is half snapped

  • Need a new rear driver-side speaker mesh cover in the back, the ones that are on the parcel shelf at the back - Haven't checked if this is removable by itself, so if not, may need an entirely new parcel shelf
  • Driver side rain shield - the clear red colour piece of plastic that sits above the door so you can open some window when it's raining...?
  • If anybody has an aftermarket centre dash console - from the 3 gauges downwards to the stereo area then welcome to show me some pics and make me an offer, I don't quite like the material of the stock console.

  • If anybody has nismo indicators at all, let me know too.
  • if you have any headlights sets/bulbs that you want to sell off, also make me an offer.
  • Rear seat covers - make me an offer OR if you have a set of rear seats for sale also let me know.
  • Castor bushes - nolathane etc etc + rack ends. please contact me ASAP

Please PM me or post here if you have something! I always check.

Cheers guys.

34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

The speaker mesh are pretty hard to find! I gave up lol

The weather shield and dash bits can be had in the CF group buys on SAU pretty cheap and easy.

For the castor bushes and rack ends etc look up GKTECH.COM and similar and you will get a good deal, they are whole arms though.

darksky34 Mentor

darksky34

Posted
  • Author
Posted

haha Mat, found some guys with a parcel shelf - so may just swap out the entire thing. don't seem to be many group buys going on now...?

i know that my castor bushes and rack ends need replacing but i'm after a quote on how much it'd cost to replace all/most of the suspension system.

darksky34 Mentor

darksky34

Posted
  • Author
Posted

Bump + update(s)

  • Armrest centre console lid - my hinge is half snapped

  • Need a new rear driver-side speaker mesh cover in the back, the ones that are on the parcel shelf at the back - Haven't checked if this is removable by itself, so if not, may need an entirely new parcel shelf
  • Driver side rain shield - weather shield. will take offers for both passenger + driver. also do not mind if aftermarket.
  • If anybody has an aftermarket centre dash console - from the 3 gauges downwards to the stereo area then welcome to show me some pics and make me an offer, I don't quite like the material of the stock console.

  • If anybody has nismo SMOKED indicators at all, let me know too.
  • if you have PROJECTOR headlights sets/bulbs that you want to sell off, also make me an offer.
  • Rear seat covers - make me an offer OR if you have a set of rear seats for sale also let me know.
  • Castor bushes - nolathane etc etc + rack ends please contact me ASAP
  • Stock R34 GTT BOV needed

  • 4 weeks later...
darksky34 Mentor

darksky34

Posted
  • Author
Posted

Another update. Items still required.

Bump + update(s)

  • Armrest centre console lid - my hinge is half snapped

  • Need a new rear driver-side speaker mesh cover in the back, the ones that are on the parcel shelf at the back - Haven't checked if this is removable by itself, so if not, may need an entirely new parcel shelf
  • Driver side rain shield - weather shield. will take offers for both passenger + driver. also do not mind if aftermarket.
  • If anybody has an aftermarket centre dash console - from the 3 gauges downwards to the stereo area then welcome to show me some pics and make me an offer, I don't quite like the material of the stock console.

  • If anybody has nismo SMOKED Front bar indicators at all, let me know too.
  • Rear seat covers - make me an offer OR if you have a set of rear seats for sale also let me know.

  • Stock R34 GTT BOV needed

34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

Another update. Items still required.

Bump + update(s)

  • Armrest centre console lid - my hinge is half snapped

  • Need a new rear driver-side speaker mesh cover in the back, the ones that are on the parcel shelf at the back - Haven't checked if this is removable by itself, so if not, may need an entirely new parcel shelf
  • Driver side rain shield - weather shield. will take offers for both passenger + driver. also do not mind if aftermarket.
  • If anybody has an aftermarket centre dash console - from the 3 gauges downwards to the stereo area then welcome to show me some pics and make me an offer, I don't quite like the material of the stock console.

  • If anybody has nismo SMOKED Front bar indicators at all, let me know too.
  • Rear seat covers - make me an offer OR if you have a set of rear seats for sale also let me know.

  • Stock R34 GTT BOV needed

You can try my stock BOV if you want, but you have to come get it :P And bring me a 6 pack lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...