Jump to content
SAU Community

Recommended Posts

Hey, basically I’m after some advice for my cars paint job.

I and trying to figure out wat will fix the following problems, weather it be taking my car to a detailer, maybe cut n polish or getting a another clear coat not sure wat will fix the following and who to see about.

I want to get rid of the minor defects that manage to piss u off the most.

Ø Pin dents – got 1 or 2

Ø Scratches to the paint from doors ect.

Ø Minor paint chips

Ø Graze on the door from someones trolley.

Now the things that really bug me

Ø I have kind of deepish swirl marks all over the car, they come out really harsh looking in the sun

Ø Bonnet has a lot of swirl marks and looks like it has less of a clear coat then the rest of the car, like the polish or wat ever has been stripped down a little.

Ø Roof – worst of the worst, my roof is starting to fade a little, has minor cracks and major swirl marks on it. It also looks like a lot of the clear coat has been taken off it.

Now short of getting the car resprayed, wat options does one have? Any advice would be great. And names and contacts for people that would do a decent job would be great (hills area would be good but anywhere round perth is cool)

Also I’m after seeing someone to fix these problems not a home job that one does, such as using scratch x ect.

Link to comment
https://www.sau.com.au/forums/topic/41748-paint-problems-advice-needed/
Share on other sites

A very good friend of mine works for Car care.. mobile service. For thos of you that have seen my car (especially on sunday for the photo shoot) my cars paint is as shiny as the day it left the showroom.

He had a 89 model blue VN commodore that was meant to be blue but had faded to grey!!! 3 hours later his car was back to a beautiful shade of blue again.

You all know how protective of my car I am so when i use someone to do something they have to be good.

Pm me if ya interested..... i thoroughly recommend him and i think he could get that beautiful shiny colour back up and fix up most of those probs!!!

I have been in talks with him to get all SAU members very cheap prices..... cheaper than most detailers........

I will prob write up a thread in regards to it soon once i get more details....

Thanks Aidwin:-)

OK guys, i will organise a bit of a group buy so to speak....

What exactly are we after....

wash plus small cut & polish and buff...... that should get out the swirl marks and generally bring the paint up to its gleaming self again, unles if ya paint is BADLY faded then you would go for a deep cut.

interior aswell??

so far Ineterested i have:

Nugget

Bless_you

Jolinator

Godfather

I would be happy in saying the above mentioned of what to get done will be Saffice but I am sure Patrick will do that little bit extra.... HE IS A PERFECTIONIST!, you will see what i mean with his van!!!

Just let me know if you guys want interior done aswell.. or just the paint.... as there is a few people I am sure the prices will be VERY cheap.... normally he said he would do my friends a cheaper than normal price but now theres a few we could prob get even more cheaper..

Hi guys. A subject that interests me too. I also have a niggling scrape on the bottom of the passenger door which is starting to rust (Aaagggghhh!) :D . So I need to do something soon. Not sure that Car Care will do painting of stone chips and this type of thing. I think they just do the cut and polish. Am I wrong? If they don't, who is recommended for touch up prior to a polish?

Also, as a matter of interest, the guy who owns Car Care has a beautiful Supra Aerotop, manual. :aroused: It is red (the worst colour for fading in the sun) and has "Speedshine" written on the flanks. It looks fantastic.

25GTT - pm on the way.

Cheers.

around the $170 mark is what you would NORMALLY pay!!

I can assure you he is going to do a LOT better deal than that..... he is been a very close friend of mine for 10 years and loves skylines as much as what i do he will do us a very good price....... he should be paying us to detail our cars! ahhah!!

OK he is going to call me tomorrow with exact prices for this! sorting it out at the moment :-)

he is going to quote us for wash, cut & polish, & buff....

the materials he uses are meguirs and even better stuff.... so should be good.

Dan put me down as interested too.

If he can shine up a black car i'll personally kiss his feet.... when i had my accident the panel beater had my car detailed but the detailer didnt get all the polish off my car now i got all these white spots i cant get rid of. :D

Lauren put it this way,

I went to SST the weekend before the photo shoot, i was teased by Paul and the rest of the posse becuase of my car being a show car and being so frickin dirty!!

Paul and Aidwin were both pretty impressed as to how it still gleams. Patrick spent 6 hours on it!!!!!!!!!!! poor bugger but it looked like it had just come out the showroom!!!!

OK guys I have now received a price range from Patrick.

For a full maximum polish taking anyting up to 6-7 hours you would normally look at $220.

He has said $150 for a job such as this. Now a normal wash and small cut polish plus buff looking at $170....... he is looking at $100.

Basically $100 - $150...... we have managed about 25 - 30% off!!!!!!

For those that want this please PM me for his number he is expecting your phone call. He is a mobile service so he can come to you wherever you are. He has asked that he does it on a saturday as it may take some time to give your car love and affection.

So basically on a saturday he can come to where ever you are and expect to pay $100 - $150 as to how full on you want it. YOU MUST SAY YOU ARE FROM SKYLINES AUSTRALIA when talking to him otherwise lookin at the $220 mark!

Everyone PM me away!!

dan: i want to get all kinda liek paint scracthes off, so it look nice and clean etc...good paint job n that, cos if i read correctly thats wat it does, then well im in to....

need to just touch up places on front bar and the back on the bottom etc.....

just want to make it shiney....

put me down, and can u pm me or just reply in this thread

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah, new members can't post pics until they reach a certain post count. If I get a chance I'll promote you to full member, if @Prank or someone else doesn't get there first.
    • Drilled the rubber out on a slow speed and it didn't catch much at all. Probably only half a dozen holes was enough to shred the rubber and it dropped off easily leaving the inner sleeve behind. Will tackle that later
    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
×
×
  • Create New...