Jump to content
SAU Community

Recommended Posts

Hi I suspect I have a faulty EBC but not sure, just ironing out the bugs with this car since I have purchaced it

here is the hardware involved

Gizzmo MS-2 EBC

GCG High Flow turbo

Stock ECU

Engine full rebuild around 10,000km ago (decked and o-ringed)

With the MS-2 off always boosts to 7psi without fail, I can up the duty cycle (0-100) upto about 50 without any changes, between 50 and 65 raises nicely upto 11psi , above that I get nothing and hard pulls in 3rd or 4th gear I occasionally get drops back to 7 psi, no matter how high I raise the duty above 65 the boost will not raise any higher than 11 psi.

I started messing with the gain and got a nice point around 50% where I like it but tried it at 70 to force some short overboosting and sure enough it will spike briefly to around 16psi ......

I am guessing the solenoid is faulty but is there something else I should be checking? I am aiming for around 14psi .....or is it the stock wastegate sticking? Not sure how far I can go on the stock one or what else could be causing it. I have no idea of the age of the MS-2 I have been told its approx 18 months installed by a professional by the last owner but the lines were cable tied onto the solenoid and were not even trimmed lol.

Edited by Neckface
Link to comment
https://www.sau.com.au/forums/topic/418125-ebc-issues/
Share on other sites

Regardless of whether there is actually a problem with your EBC, you do know that you shouldn't really be aiming for high boost levels with a stock ECU don't you? Especially with a highflow turbo. The ECU could well be cauing your inability to gain more boost be shutting down the engine's power through R&R.

Oh, and trhere's nothing wrong with cable ties for vacuum/boost hoses. They nip up nice and tight.

Link to comment
https://www.sau.com.au/forums/topic/418125-ebc-issues/#findComment-6713873
Share on other sites

found out what the issue was, it was configured for "open" mode, switched to "Closed" and it all works as it should, no idea of the difference between these 2 tbh, the manual is terrible and makes no sense.

might not be stock ECU after a bit more playing today as it will boost to 15psi without fuel cut, ah the joys of second hand car buying, no idea of the prievious mods ....

And Jez I eventually will, just working out my options of a custom tune, but thats a discussion for another thread

Link to comment
https://www.sau.com.au/forums/topic/418125-ebc-issues/#findComment-6714288
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've got a 2011 J50 that I imported six years ago. The unmodified factory AV system date and time has always been correct ( Japanese timezone of course ) up until last month. About two weeks ago, at engine start, the system wished me a happy new year ( in Japanese of course ). I can't think of anything that would make the system think that the date had changed, unless the GPS component has failed/reset somehow ? I checked the GPS reception in the system settings, and it can still see the satellites. Has any other J50 owner had this happen ?  It's no biggie, just annoying that it tells me the wrong date anytime I start the engine. 😅
    • Love following your adventures on IG, hopefully if you're still around in Japan when we visit again wouldn't mind going for a few beers with you (that's if you're keen on hearing how I hate Nissans).
    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
×
×
  • Create New...