Jump to content
SAU Community

Recommended Posts

hey guys

wrecking out a damaged car, has no straight panels except fibreglass bonnet and rear bumper, drivers side skirt etc...

Engine sold deposit paid''

RB25 Manual conversion,

Gearbox, brake and clutch pedalbox, master cylinder, slave cylinder, clutch lines, flywheel, clutch, tailshaft, gearstick, interior trim, steering wheel, and all bolts $2000

Or will sell gearbox alone seperately $1450

Can also fit manual conversion drive away deal for an agreed fee

Rear helical diff $200

Rear CV shafts 5 bolts $150

Front mount intercooler kit HDI Hybrid brand with all pipes, mounts, and silicon hoses, comes with origional instructions kit is nearlly new intercooler is in perfect condition

Cost me $660 plus postage $350 and can fit for an agreed fee

Alloy airbox with perspex inspection panel $50 ono

Drift blow off valve $40

Turbosmart blow off valve $100

Fibreglass vented bonnet couple of chips nothing serious can be fixed $200 worth a lot more

Nismo Bilstein shocks and springs all round $550 ono rides like a dream not like cheap coilovers

R34 wheels painted flat black $450 ono

Custom 3" exhaust turbo back, near new cost $950 to be made, yours for $500 ono can fit for an agreed fee

R34 front brake calipers and discs 310mm diameter includes lines and bolts $350

R34 Rear brake calipers, handbrake setup, cables, drums, discs, hubs, etc... $450 ono

Aftermarket dump pipe stainless with screamer pipe $50

R34 AFM $150

Drivers side skirt $80 2 peices, can have passenger too but damaged

Rear bumper bar in good condition $150 ono

Rear spoiler undamaged $100

Rear seats $80

Passenger and drivers airbags make an offer

WHOLE CAR ONLY HAS 90,000k ON IT AND WAS IN VERY GOOD CONDITION AND MECHANICALS STILL ARE

I AM SLIGHTLY NEGOTIABLE ON ALL PARTS AND CAN ARRANGE WORKSHOP FACILITIES TO FIT PARTS

Located in Windsor NSW Pickup Preferred

I may have other parts your after just ask....

CAN SEND PICS OF PARTS UPON REQUEST PLEASE TEXT DURING WORK HOURS

Tim

0404321205

shotgun airbox - pending pics.

do you have the centre console lid? Could consider taking the entire trim as well.

also would like pics of everything from triple gauge cluster down to the centre console.

Parcel shelf?

weather shields?

rear seats - what's the condition and will need pics - how much you selling for?

skyline front bonnet emblem? or rear 25GT-T emblem?

shotgun on all thissssssssss

Backup shotgun on airbox lol

and the drivers seatbelt if its good condition

oh and whats the steering wheel like??

Edited by lovin it

Steering wheel is good and a few trim bits are damaged but a lot is ok...

Please SMS me guys i have my phone on me all the time but rarely on a computer

0404321205

CAN SMS PICS

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...