Jump to content
SAU Community

Nissan Laurel C33 Auto To Manual Conversion

Samgrainger32
 Share

Recommended Posts

Samgrainger32 Rising Star

Samgrainger32

Posted
Posted

gday ive just got my new toy a c33 laurel and got it for a good price everything i want only problem is it is auto so will all know what the first thing that needs to be done what i need from some one that has maybe done this before and is in the now how is what parts i need to do this the car has a rb25 in it and i know parts for the laurels are hard to find i have found a few like dash cluster and gearbox its self and some interior parts but other things like what pedals can i use and are they the same as say a r33 or r32 if some one could give me a list of things i would need would be great

thanks

  • 2 weeks later...
AMR33 Mentor

AMR33

Posted
Posted

gday ive just got my new toy a c33 laurel and got it for a good price everything i want only problem is it is auto so will all know what the first thing that needs to be done what i need from some one that has maybe done this before and is in the now how is what parts i need to do this the car has a rb25 in it and i know parts for the laurels are hard to find i have found a few like dash cluster and gearbox its self and some interior parts but other things like what pedals can i use and are they the same as say a r33 or r32 if some one could give me a list of things i would need would be great

thanks

I was going to do this on an A31 Cefiro but didnt. I did a bit of research etc and have an idea on what parts you need:

Box

Clutch

Master Cylinder

Tail shaft

Pedal box (I was told an R32 pedal box would fit in the ceffy so its likely to fit the C33)

Hand brake assembly (my ceffy has the old school foot brake)

Shouldnt have to change ECU etc as to my knowledge these run independent boxes.

I think thats about it from memory. Hope this helps

Nic_A31 Grand Master

Nic_A31

Posted
Posted

Yes the pedal box fits both A31 and C33, you also need a manual brake pedal (narrower), and manual footrest (also not as wide as the auto item)

Auto transmission is run on an independent ECU, which is located in the driver's side kick panel, the engine ECU will run fine without it. The only part you need to worry about there is rigging up the neutral-position sensor, or bridging the connector, to trick the car into starting, otherwise it will won't think it's in park/neutral and the starter circuit doesn't work.

AMR33 Mentor

AMR33

Posted
Posted

Yes the pedal box fits both A31 and C33, you also need a manual brake pedal (narrower), and manual footrest (also not as wide as the auto item)

Auto transmission is run on an independent ECU, which is located in the driver's side kick panel, the engine ECU will run fine without it. The only part you need to worry about there is rigging up the neutral-position sensor, or bridging the connector, to trick the car into starting, otherwise it will won't think it's in park/neutral and the starter circuit doesn't work.

So the box has its own ECU? is that then connected to the engine ECU or its just on its own?

AMR33 Mentor

AMR33

Posted
Posted

Everything between Cefiro and Laurel is interchangeable except rear door cards, glass and fixed body panels.

They're the exact same chassis with a different shell on them.

Is that right? I didnt know that. Good news as I may be wrecking a ceffy soon (if it doesnt sell) and if parts fit on Laurel, well that means bigger potential market for me.

Samgrainger32 Rising Star

Samgrainger32

Posted
  • Author
Posted

really thats a sore i can relax on the manual interior parts now and just have to sort tail shaft and crossmember out ive read that crossmember 'B' is the one to use and have checked my mates crossmember on his factory manual c33 and it is a B but will it fix with the 25 box thats the question fingers crossed as we both are about to take on the same things

AMR33 Mentor

AMR33

Posted
Posted

Everything between Cefiro and Laurel is interchangeable except rear door cards, glass and fixed body panels.

They're the exact same chassis with a different shell on them.

Does this apply to C33, C34 and C35 Laurels?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • djr81
      RB26DETT Sketchy boost mod?

      By djr81 · Posted

      Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • PranK
      Chris' Toyota Mark ii JZX110

      By PranK · Posted

      This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
×
×
  • Create New...