Jump to content
SAU Community

Recommended Posts

For government to be effective, industry must prosper and workers get paid. Fuel in cheap and plentiful supply is important to the national welfare, not the environment. It's only the balance of power held by tree huggers (and therefore their green voting constituencies) that are making the government address these green issues. Government use tax to provide infrastructure and services and healthy jobs for themselves and the public sector/military.

Don't get me wrong, I did my bit for the environment by standing at the back of the 42 ton Leopard tank I was commanding, throwing grass seed into the soil torn by track turns while chewing 2 litres of diesel every kilometer........

Hi. I forwarded this message to my colleagues with the following note:

"If you are into making futile gestures, this might be for you. As I was not going to buy petrol tomorrow, I will now have to make a point of not buying any, so that someone will notice(!). Methinks that this is based on a common lack of understanding of the international oil market, the ability of the Australian Government to do anything about it and the general view that the oil companies are nasty, capitalist enterprises. Quite how the economics of this protest is supposed to work seems a bit ropey to me, but then it sounds good, doesn't it!

I shall also register my protest by putting my fingers in my ears and humming whenever I hear someone on the radio trying to explain the oil prices to me.

That'll show 'em!"

It's all a load of bolleaux, IMHO. Also, just to be more pedantic than usual (!!), the petrochemical industry indeed make plastics, etc, but they don't refine oil. The Petroleum Refining Industry does that. Many of them come under the same holding company, but they are very separate businesses. Petrochemicals is but one small bit of industry that is downstream of the oil industry - and it is way, way downstream.

If you want to make a difference, lobby the government and your MP to urge the US to change its policy on Israel and the Palestinians. Oh, but don't expect it to change the price of fuel at the pump too soon.

Meanwhile, the underlying trend of fuel prices is inevitably up. The known oil reserves are dwindling and the cost of development of any new fields versus their size is going up. So enjoy your gas guzzling monsters while you can.

Cheers. :P

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Wanted to add some of my R33 GTST  R34 GTR wheels, 18x9 ET30 with 255/35/R18 PS4S'   BBS RE-V7 029 18x9.5 ET22 with 255/35/R18 PS4S' Needs a bit of camber   
    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...