Jump to content
SAU Community

Recommended Posts

R34 GTT Factory Manual Sedan For sale

$17,500ono can remove parts and replace for standard ones for lower price or swap for tow car with cash my way, located in Liverpool NSW

Yous may know this car number plates used to be DV11SH and was owned by a girl in the central coast i havent owned it for very long at all deciding to sell cause just not my type of car, thought i would try something different with the skylines but not really my cup of tea so deciding to sell to get a tow car and back into S chassis nissan for a skidder, there is absolutely nothing wrong with this car guarantee, if you know the last owner than you know no expenses were spared all quality parts.

0481 112 959 SMS preferred during work hours.

Photos are limited due to not owning the car for very long but can take some and MMS you some if you are interested.

post-85383-0-16009600-1359253760_thumb.jpg

-Full Uras Series One Body kit and badge kit

-Hks hyper d coil overs all round

-Nismo Sway bars front and rear

-Work Emotion Xd9's. 18x10 Rear 18x9 front Wrapped In federal 595's with plenty of tread left!!

-guards rolled and slight flared by sydney gaurd rolling.

-Fujitsubo 3.5'' exhaust system

-Splitfire coil packs (few months old)

-Greddy Oil Cooler

-Greddy Front Mount intercooler (return flow)

-HKS SSQV b.o.v

-Blitz power Intake

-Rare Blitz uras edition gauges (oil temp,oil press and water temp)

-Apexi t-timer

-Momo Steering wheel

-Razo pedals

-ARC small gear knob

-Rare Factory knee surround pads

-New JVC iphone headunit (bluetooth etc)

-MTX 6'' speakers Front and rear

couple of little things i may have missed.

Link to comment
https://www.sau.com.au/forums/topic/418633-nsw-r34-sedan-gtt-manual-black/
Share on other sites

ok.. i am best friends with both jada and andrew, ill try and dig up some good quality pics of the car that i took and u can use them to sell the car if u like..

good to hear its running well!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...