Jump to content
SAU Community

Recommended Posts

Hi everyone, my name is Kiley and I'm actually on here from the USA. I don't have a Skyline because well, they're not legal here. So I did the next best thing and bought what we call a 240sx (not sure if they call them that there or not) and installed a RB26 out of an R33 skyline GT-R. So I got that going for me.

What's my reasoning for joining your site then you may ask? I've been wanting to go single turbo on my RB26 and need to sell my current twin turbo setup. I've tried on my continent but hope I can find some interest on yours too!

I'll post some pictures of it and a link to my build thread on one of the American forums so you can tell I'm a real person. But here's some basics of the car. Look for the stuff for sale in the "parts for sale" section soon. Thanks!

How the car looked when I first got it:

000_0034.jpg

A couple tables of parts for the motor:

IMG_0333.jpg

100_0202.jpg

18x12 inch SSR Professor SP3's for the wheels:

7.jpg

All back together and ready to go in the car:

top.jpg

Getting the car tuned:

beforedynoedited.jpg

460whp (not sure what that equals in your terms!) on 93 octane pump gas.

Nearly didnt fit with the BN Blister widebody kit:

100_0382.jpg

First test drive!

DiffBreakInclosefront.jpg

So again thanks for checking it out. I'm honored to be on a site with so many very nice, very real skylines.

Link to comment
https://www.sau.com.au/forums/topic/418941-new-from-the-united-states/
Share on other sites

that is shit hot.

and i bet it cost you f**k all cos you live in maryker.

god damn that would be so illegal in victoria! all the best man, and more pictures/videos. get that on proper fuel and retune it.

Ah and as I said here is my build thread:

http://forums.nicoclub.com/beat92-s-overkill-is-underated-build-thread-t518849.html

Here's a video for anyone interested in hear HKS272 cams on an RB26 at idle. One of my favorite short videos of the car:

And here's a video from the guy that tuned it. Shows the Haltec Racepack dash I have as well as a dyno sheet at the end:

Thanks for the good words! It was a very expensive build here since no parts are available. I actually got a lot from Australia because they seem pretty common there.

I would have thought your laws would be easier on cars since you can actually have skylines there. You have so many cars I wish I could get here.

Thanks for the good words! It was a very expensive build here since no parts are available. I actually got a lot from Australia because they seem pretty common there.

I would have thought your laws would be easier on cars since you can actually have skylines there. You have so many cars I wish I could get here.

wow brother! australian prices must have scared the shit out of you!

im not too sure on laws for standard cars. but in the state of victoria the police do not look kindly upon modified cars!

im pretty sure if they saw yours on the road they would just shoot you on the spot. :woot:

all the best with the sale and stuff man......

Pricing was better in Australia then in the US! Shipping was just more expensive than usual, but not unreasonable.

Hardest thing was finding factory parts like valve spring shims for adjusting them. We couldn't find any and didnt want to risk not being able to find any in future valve adjustments so we got Kawasaki street bike valve shims and machined my valve retainers to accept them for spacing. Little extra work but Kawasaki bike shims are a lot easier to get than RB26 ones here!

Other than that it was a lot of fun and certainly worth it for something very rare around here.

Our police don't take kindly to it either due to it being straight pipe exhaust....but I'll keep my bullet proof vest on if I ever come to AU then!

dont liten to this guy. hes put a 30 year old v8 in his r33.

My V8s newer then your cast block 6 ya smeg head lol

Plus i said I liked the car :/

Edited by Captain Natro

looks farken hawt!

welcome.

also, its a 240sx over there, but the combo of that front and that rear wasnt available here or japan from factory.

the front is from a 180sx.

the rear(shell) is an s13 silvia.

and yes, alot of the mods youve made, couldnt even get close to legal over here.

but trust me when i say, if we could, we would.

and are NO skylines legal?

i thought it was just the gtr's?

hope you enjoy our site.

if you ever come to aus, come to one of our runs and have a chat.

we're all pretty friendly people.

looks farken hawt!

welcome.

also, its a 240sx over there, but the combo of that front and that rear wasnt available here or japan from factory.

the front is from a 180sx.

the rear(shell) is an s13 silvia.

and yes, alot of the mods youve made, couldnt even get close to legal over here.

but trust me when i say, if we could, we would.

and are NO skylines legal?

i thought it was just the gtr's?

hope you enjoy our site.

if you ever come to aus, come to one of our runs and have a chat.

we're all pretty friendly people.

Good to hear you guys appear to be having fun on this forum. They've kind of died over here because everyone's to serious!

Everyone here always tries to put the "JDM Silvia" front end on my body style, but I'm a fan of the flip ups for some reason. Like you said it was never offered anywhere else as far as I've found so it seemed different world wide even though its not different here.

I thought from all the RB parts I've found from there that it was pretty much anything goes over there! You've crushed my dreams by telling me you apparently have a stricter government then we do.

As for no Skylines being legal, none are to be brought straight over. Something like 96-98 R33 gtr's are but you have to do a lengthy and expensive legalization process like changing the car to OBDII and some emissions system work. But 96-98 GTR's are the only ones that were ever crash tested. You can get any as track cars but none legal to drive on the road yet. We have a 25 year "classic car" rule so we can start bringing in R32's next year under that. Canada only has a 15 year so they've been bringing them in for a while now up north.

And if I ever come over there it would be one of my goals now to meet up with a skyline meet. I'll keep it in mind thanks!

Awesome build all the shiny new parts on the bench are what wet dreams are made of! :woot:

Welcome to SAU this is the best site for RB tech lotsa the guys here REALLY know their shit :thumbsup:

I actually came here a lot during the build. Most info I could find on the RB that was in English and I could mostly understand.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...