Jump to content
SAU Community

Mid March Mid Way Meet Up.


luke gtr
 Share

Recommended Posts

ok, have thought about this for a while.

i think its time for a lunch time meet up with the act folks.

so, heres the details:

meet: cross roads kfc(homemaker centre, cowpasture rd)

meet time: 9:45

leave time: 10:30(sharp)

est arrival time: 12:00

date: sunday 10th march

destination: goulburn(montague st)*

there is a park with some picnic tables/chairs.

i would recommend bringing your own chairs/blankets/tables/picnic gear.

this street is perpendicular to the main rd which has take away/fast food for the lazy people(me).

so, get your asses there.

doesnt matter what car you bring.

just bring yourself, any family/friends, and be ready to have a good time.

see you all then.

*may have to change final location, have checked goulburns website, and the goulburn show is on.

i dont know where they will locate this, so please keep an eye on this thread.

*also, this is NOT an official sau club cruise.

im trying to work with execs to see if it can be, but cant promise anything.

Link to comment
Share on other sites

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

Don't everyone jump forward at once :P

I could be keen for this, will know for sure a bit closer.

hope to see you there, and maybe finally meet?

didn't get a good look at your car at nats either :(

Link to comment
Share on other sites

hope to see you there, and maybe finally meet?

didn't get a good look at your car at nats either :(

I don't know if anyone did, no one seemed to take any pics of it either lol.

I'd really like to go, should be good. Is there anywhere in that kinda area with a BBQ? That could also be cool.

Link to comment
Share on other sites

Hells yeah, sounds great. Put me down. Hopefully have the car run in and tuned properly.

Kat that's the beauty of white, it helps to fly under the radar. Especially when you got some power underneath. I had a look at yours when it was at CRD a while ago, mine was in at the same time. Looks very tidy.

Link to comment
Share on other sites

I dont think mine was actually in the shop. They had my motor out and the car was being stored in their off premises shed. But if it did happen to be in there while you were there, mine is a white 32GTR with a carbon bonnet and no wing. number plate is GOJIRA. Hopefully ill get to check a few out on this cruise.

Link to comment
Share on other sites

I *think* I remember seeing a white one with a carbon bonnet at some point, can't say I remember the plates though!

Hopefully get to check yours out on this cruise! Get a pic of the 2 whities together :D

Link to comment
Share on other sites

Hell yeah, I look forward to meeting a few people and getting a closer look at your setup. I just love white on the 32s :yes:

Im always up for some pics.

Should be a great day.

Link to comment
Share on other sites

  • 2 weeks later...
  • 3 weeks later...
Guest
This topic is now closed to further replies.
 Share




  • Similar Content

  • Latest Posts

    • Go to SP mufflers and get the muffler of size you want and make a nice mid muffler. It's about that simple! I have 2x 3.5 Magnaflow straight through Mufflers and while it's pretty loud with the Varex open, it's quiet enough with the Varex closed. You can also buy off the shelf Magnaflow straight through mufflers as well. You also have a turbo to quiet the car down too. Don't overthink it. Buy my extra Magnaflow muffler sitting on a shelf doing nothing (buy it new, ignore this part)
    • Centre-offset muffler under the floor, same as stock. Just....3.5". The change from straight pipe there to centre-offset will mean that you need to remake some of the pipe (add a bend or two).
    • Hey guys. So my R34 GTT has a custom 3.5” exhaust (done by previous owner) with a high flowing cat, and then just a Varex cannon muffler on the back. The car does drone alot and is really loud even on highway driving just cruising, as you can imagine due to the Varex muffler basically being a straight through with the valve open. As much as i love a loud RB, it can be a bit much with no other muffling in line and just driving casually. I wanted to lower the volume output on the exhaust a bit, as well as remove the drone (probably a way to do both at once), and was going to do it all myself as I am a fabricator and have done exhaust work in the past, so the fab work isnt my issue, im just not sure on the right product or type of product to use to get the job done, and i doubt an exhaust shop would be wanting to help me as they wont be making any money from helping me, unless they supplied the product? Anyway any help or guidance in best way to approach this would be awesome   Thanks in advance
    • Meh, whilst the Honda is a "really" good car and has potential if you want to drop coin on, it was uninspiring for me to look at, but, it did serve its purpose and is now in the boys hands, his happy, his girl is happy, as she wasn't to keen on the noisy old Patrol, and most importantly, the Minister for War and Finances is extremely happy that her "little baby boy" (6'2 nugget who is currently training to be a copper, which will make 3 coppers in the immediate "circle of trust") has a well sorted reliable car that doesn't guzzle diesel Me, I'm more than happy with the NC MX5 that I replaced it with, it's a fun little car that I like looking at, like driving, and yes..... I do like the fact that the maintenance and modifications that I have done/will do are plentiful and relatively cheap, well........ while staying naturally aspirated slow that is, and that's all I really need for a fun little daily, I can rev the 5hit out of it rowing through the gears and never really break the speed limit  In saying that wicked word, "modifications", I've already ordered something for some noise and an additional "3 ish" horse powers, or whatever it gives, in the form of a header, and, a new set of "cheapo" BC coilovers that are already sitting in the shed waiting to get put in, I had the same BC's in my old NB and found they were fine for the street, hwy, and the occasional track days I did in it, they have 6kg front and 4kg rear springs which is about 10% stiffer than the stock springs which I found worked well for their price  I've also already been in touch with MX5 Mania in Dural, so once the header is on it will get a ECUTek RaceROM tune there (I cannot rev match for 5hit, and I loved the RaceROM rev match and FFS in my old 86 "RIP") In other, maintenance news, I put some new sparkler plugs in it, and have a new set of DBA Street series pads to put in over the next day or so, I'm running the DBA street series in the SS and Honda and really like them, they work great and are not dusty at all I've also booked in a few days leave over this weekend to give me 4 days weekend do some paint correction and give the leather seats some conditioning and interior some Bissell and steam cleaning OCD lovin', the carpet and interior looks clean, but from my experience with the Bissell IRT carpet, and the steam cleaner IRT trim, looks can be deceiving I've also found that finding a detachable hard top is proving problematic, the main reason why I didn't like the NC initially was the power retractable hard top that I seen them with gave the roof line a weird look, the detachable roof though looks good, and is a same shape as a NA/NB hard top, similar, but unfortunately not the same as it has different fixture point on the front, so fitting a easy to get NA/NB detachable hard top is no bueno New Old cars are fun, cleaning, hunting and playing around brings much joy How are your beasties going? Do you still have the Skyline with the LS???, or Barra??? that you were playing with
×
×
  • Create New...