Jump to content
SAU Community

Recommended Posts

Interior is rather close to mint condition apart from some very slight plastic peel due to some sort of harsh cleaning liquid being used at one point of time just under the clock.....

I'm still interested mate, but I need to know more about this box, could be an expensive ppg or osgiken, or jus some worthless junk that will blow up first time it sees 300rwkw.

Very keen but only with info on the box.

I'm a bit in the dark regarding defects and legalities, but I have an N/A R33 which i'm currently deciding what to do with.. (service & keep or buy another car). Would this car for sale be of any use to me in the sense of swapping out all the parts into mine or vice versa? I mean legally is there anything worthwhile I could actually do with both cars? Can a non-defected non-turbo be upgraded using this car with less hassle than getting the defect removed on it?

Edited by Infraction

mmmmm you could but i would not waste my time....... You would have to swap the engine management, wiring harness, and a lot of other waste of time head hassle bits plus you would want to swap the brakes aswell (just sell your NA and buy a turbo alreaddy done up ... by far the cheapest way unless oyu have the right tools, garage, and know what you are doing... Y

I'm still interested mate, but I need to know more about this box, could be an expensive ppg or osgiken, or jus some worthless junk that will blow up first time it sees 300rwkw.

Very keen but only with info on the box.

ou could prob do it but i would not waste my time: not that i mean to kill my sale LOL

You can organise a time to come around and have a look i should be back by sun / mon at the latest (currently in victoria laying low from the people that try and dispose of people unlawfully that are from acers and police etc)...... snaps quickly into gear with a pop too.....

I'm still interested mate, but I need to know more about this box, could be an expensive ppg or osgiken, or jus some worthless junk that will blow up first time it sees 300rwkw.

Very keen but only with info on the box.

is that jimmy sway?

Your stock gear box from a 33 should be able to handle easily 300rwkw....... if you crank it into gear you might start getting a little bit clunky.... You are much more likely to go through your clutch than your gear box!!! I have seen people running well over 300 rwkw from the stock 33 five speed.....

MMmm would be an option but i do not have the stock parts turbo low mount manifold etc i only have the gduounk parts.... i am not too sure how much the box was... I will try and find out...

I got a complete stock setup that will be perfect for this car :D

How is that stealthy bump? He updated the thread to say he'd replied to the PM I sent him.

Same thing almost every other seller does?

Thanks for the reply by the way, pm me/update this thread when you have the info.

Cheers

How is that stealthy bump? He updated the thread to say he'd replied to the PM I sent him.

Same thing almost every other seller does?

Thanks for the reply by the way, pm me/update this thread when you have the info.

Cheers

Not a prob will do: can not beleive that this car for this price has not even sold for some ones thrash car.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
×
×
  • Create New...