Jump to content
SAU Community

Recommended Posts

Hi guys

Got some more R33 GTS-T parts...

Let me know asap if you are interested in anything as the early bird gets the worm...

If you are serious about a part, you will call or text me,
as I don’t come on here anymore due to parting out my whole skyline.

So topic posts and my inbox will be responded with great delay (or not attended to at all). I’m very easy and honest to deal with, so contact me by phone.

Low-ballers and time wasters will be ignored & possible delivery at buyers expense.

All parts can only be picked up from Reservoir 3073 or Brunswick 3057 in VICTORIA

I will be very firm with my prices.

- RB25 Gearbox
- Came off a series1 R33 GTST -
Was is my car, works fine
-
$900

- Greddy forward facing plenium
with
90mm throttle body
, only in car for 500kms
!
-
$650

post-62246-0-34574300-1360195633_thumb.jpgpost-62246-0-59804700-1360195728_thumb.jpgpost-62246-0-80131800-1360195818_thumb.jpgpost-62246-0-43293500-1360195908_thumb.jpg

Want both? Package = $1400

- BILSTEIN ADJUSTABLE SHOCKERS WITH APEXI SPRINGS
, have not even travelled 3,000kms (car was mainly off the road as a project) Never used for track, all adjusted to a nice ride high, firm but still comfortable ride. Ready for use! Just bolt them in Great condition!
$750

post-62246-0-28807100-1360197317_thumb.jpgpost-62246-0-46745600-1360197344_thumb.jpgpost-62246-0-79778700-1360197360_thumb.jpgpost-62246-0-17576300-1360197370_thumb.jpgpost-62246-0-51504700-1360197386_thumb.jpg

- Drive Shaft
for manual gear box -
$100

- 3 inch Stainless steel High flow ca
t, minimal use, Can be polished to look new, 2,000kms
$50

post-62246-0-22972500-1360197730_thumb.jpgpost-62246-0-28924800-1360197739_thumb.jpg

- 3 inch dump pipe,
repaired at top, fits on factory turbo to cat
$30

post-62246-0-56998500-1360197807_thumb.jpgpost-62246-0-92595300-1360197797_thumb.jpg

- 3 inch exhaust
(after cat) with
4 inch muffler
(copy of apexi exhaust) Sounds great!
$250

post-62246-0-14062200-1360197867_thumb.jpgpost-62246-0-02017400-1360197859_thumb.jpgpost-62246-0-09047000-1360197880_thumb.jpgpost-62246-0-70903100-1360197885_thumb.jpg

- Silencer
for 4 inch muffler
$20

Want the full exhaust set up? Package = $300

-
R33 Tail lights
, pair
$30

post-62246-0-90422800-1360197999_thumb.jpgpost-62246-0-35153500-1360198005_thumb.jpg

- Series 2 factory headlights
, great condition
$300

post-62246-0-23484700-1360198224_thumb.jpgpost-62246-0-86296700-1360198233_thumb.jpgpost-62246-0-05156900-1360198240_thumb.jpgpost-62246-0-13348200-1360198252_thumb.jpgpost-62246-0-40172600-1360198267_thumb.jpgpost-62246-0-95065000-1360198282_thumb.jpg

-
Series 2 factory front grille, great condition,
dirty in picture
$20

post-62246-0-88416800-1360198385_thumb.jpg

- SET/PAIR series 2 indicator/fog lights and cover $100

post-62246-0-11287700-1360198567_thumb.jpgpost-62246-0-61942400-1360198574_thumb.jpg

- SET/PAIR side mirrors great condition, cobwebs in pictures $20

post-62246-0-44599700-1360198591_thumb.jpgpost-62246-0-20868000-1360198603_thumb.jpg

- Series 1 dash
(no airbag) excellent condition
$20

post-62246-0-87071100-1360198872_thumb.jpg

- Series 1 factory steering wheel
heavily worn, great for Roadworthy’s
$10

- Series 2 rear parcel shelf
(excellent condition, took me ages to find one in such good nick, no holes in speaker grille/cover)
will also fit in Series 1 $40

post-62246-0-95890500-1360198879_thumb.jpgpost-62246-0-42062700-1360198885_thumb.jpg

CALL OR SMS NOW TO AVOID DISAPPOINTMENT!

Speak to you soon

Ben 0422 782 888

Just as sounds a carpet rugs ad! ;)

On a serious note, would lights fit a GTR and would you take $200?

I don't think they will fit, due to panels being different sizes. You would need to search around for more information. $300 flat price.

  • 4 weeks later...

UPDATE!!! SEE BELOW FOR PARTS THAT HAVE BEEN MADE EVEN CHEAPER!!! GRAB A BARGAIN!!!...


Once again, I will be very firm with my prices.


CHEAPER - RB25 Gearbox - Came off a series1 R33 GTST - Was is my car, works fine, no clutch - ONLY $600

SOLD - Greddy forward facing plenium with 90mm throttle body, only in car for 500kms!


CHEAPER - BILSTEIN ADJUSTABLE SHOCKERS WITH APEXI SPRINGS, have not even travelled 3,000kms (car was mainly off the road as a project) Never used for track, all adjusted to a nice ride high, firm but still comfortable ride. Ready for use! Just bolt them in Great condition! ONLY $600 BARGAIN!!!

attachicon.gifIMG_0260 (800x600).jpgattachicon.gifIMG_0263 (800x600).jpgattachicon.gifIMG_0261 (800x600).jpgattachicon.gifIMG_0262 (800x600).jpgattachicon.gifIMG_0264 (800x600).jpg


SOLD - Drive Shaft for manual gear box


- 3 inch Stainless steel High flow cat, minimal use, Can be polished to look new, 2,000kms $50

attachicon.gifIMG_0274 (800x600).jpgattachicon.gifIMG_0275 (800x600).jpg

- 3 inch dump pipe, repaired at top, fits on factory turbo to cat $20

attachicon.gifIMG_0277 (800x600).jpgattachicon.gifIMG_0276 (600x800).jpg

- 3 inch exhaust (after cat) with 4 inch muffler (copy of apexi exhaust) Sounds great! $200

attachicon.gifIMG_0270 (800x600).jpgattachicon.gifIMG_0273 (800x600).jpgattachicon.gifIMG_0271 (800x600).jpgattachicon.gifIMG_0272 (600x800).jpg

- Silencer for 4 inch muffler $10


CHEAPER - Want the full exhaust set up? Package = ONLY $250


CHEAPER - R33 Tail lights, pair ONLY $20

attachicon.gifDSCF3923 (800x341).jpgattachicon.gifDSCF3924 (800x260).jpg
SOLD - Series 2 factory headlights, great condition

SOLD - Series 2 factory front grille, great condition, dirty in picture
CHEAPER - SET/PAIR series 2 indicator/fog lights and cover ONLY $60
attachicon.gifDSCF5235 (800x600).jpgattachicon.gifDSCF5236 (800x600).jpg
- SET/PAIR side mirrors great condition, cobwebs in pictures $20
attachicon.gifDSCF5230 (800x600).jpgattachicon.gifDSCF5233 (800x600).jpg
SOLD - Series 1 dash (no airbag) excellent condition
- Series 1 factory steering wheel heavily worn, great for Roadworthy’s $10

CHEAPER - Series 2 rear parcel shelf (excellent condition, took me ages to find one in such good nick, no holes in speaker grille/cover) will also fit in Series 1 ONLY $30

attachicon.gifDSCF5163 (800x600).jpgattachicon.gifDSCF5164 (800x600).jpg

CALL OR SMS NOW TO GRAB A BARGAIN!!!

Speak to you soon

Ben 0422 782 888

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...