Jump to content
SAU Community

Recommended Posts

ok so big news laurels tuned and going after a very expensive few weeks ended up throwing out the ems stinger shit edu and got a new haltech platinum pro after having to stuff around with the loom and cas as was all up the shit from the ems (NEVER BUY ONE) got the car to start and the tuner over to load a quick base map in so i could drive it to the dyno the next day few hours later it was done turns out i have a stock fuel pump not a walbro like i thought shame but that held me back on the dyno and tuner had to set the limiter to 6500 as it was starting to lean out over that so ended up with 260kw lot less then i was expecting but will be good to actually get a hang of the car as its still super quick and I've never had anything with that much power before and plan on putting better pump and injectors in it in a few months been going through the hassle of getting it rego passed few hassles but will hopfully have it sorted soon

null_zps2a642773.jpg

null_zps4aca0f0c.jpg

null_zpsec53349d.jpg

Was down in Tas for holidays, saw your car (i think) at the bridgestone, looks awesome. Loving the rims on the rear!

Yeah man that would of been mine thanks the wheels on the back I borrowed from a mate had semis on wouldn't believe the amount of grip they give you :)

  • 3 weeks later...

well spent the weekend driving the laurel around regoed and tuned for the first time and had the best time went out with a few friends for a drive friday night car went great beside speedo randomly stopping later find out the cable snapped just after the sender that sucked done few foot on coz straya!!! bit sad on the diff cutting one some times but a locked diff will be going in asap ready for power cruise also had to put a 10mm exstended clutch slave pin in as the clutch wasn't engagging all the way solved that so from now and power cruise actually have to learn to skid the car this will be fun

1450720_659152817470002_1104679501_n.jpg

1393698_659154574136493_831584056_n.jpg

its not to bad being that there about 3mm gap between guard and tyre in the back I'm running 2 degrees in the back and 3 in the front the back has been lipped only and the front has been lipped and the top rail that always cuts the centre of the tyre in the front I've rolled over flat so it won't cut and also acts as a cover for the wiring loom

na you'll be sweet!

just remember if your gonna go low cut and bash the lip in the front so you don't cut your tyre!! :)

Edited by Samgrainger32
  • 3 weeks later...

cars been going awesome locked diff is in power cruise is entered and can't wait 25th 26th of jan will be the best weekend for this car had a play with my new gopro and suction caps suck keeps going loose and falls down and if got as hero 3 black and after i got home to watch some of the footage it was shit sound was terrible and video was not the best after doing bit more reading i trend the hd down to 720p see how that works anyone else used one and know what settings are best for outside of a car?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...