[Wa] Fs: S2 Rb25Det, Rebuilt Rb26 Head, Few Other Parts

[VLSteve]

Bought from kyp welshpool- low km 1995 R33 series 2 engine. Had it in one of my VL's running max 10psi with standard turbo, ecu and injectors.

Head cleaned up recently - replaced valve springs with 'performance springs', new nissan valve stem seals, head skimmed, new exhaust manifold studs. Work done by 'Performance Modifications' in Osborne Park.

Ready for tomei poncams which I didnt get around to buying yet! Comes with stock cams.

Lots of money spent on New genuine Nissan parts - cam seals, cam tunnel half moons, cam cover seals, front and rear main seals, inlet manifold gaskets, head gasket, coolant hoses, turbo copper washers etc.

Genuine nissan timing belt and idler/tensioner bearings.

New gmb water pump.

Ready to run with stock coil packs, injectors and turbo im after $2500ono

Can supply an R33 engine loom and ecu that I got from KYP with this engine but haven't used it myself. Also have alternator, powersteering pump and prob an R33 aircon compressor too.

Have R33 engine mounts available.

Options- Deatschwerks 550cc injectors only seen dyno time $600

-R34 OP6 hiflow turbo built by per4manz in Welshpool, very little use and no shaft play great condition $700

(Theres currently no injectors or turbo turbo fitted at the moment.)

Also have Xtreme h/d cushion button clutch with flywheel has done approx 5000km half of which were behind a non turbo RB30.

Possibly might have an RB25DET gearbox I can sell too.

Prefer not to sell the extras before the engine as I can always use them later.

I have a few more parts such as 1993 Rb25det short motor which was running fine before a mate pinched the head and oil pump for a twin cam 30 build.

2x RB26 heads with manifolds -one freshly rebuilt with hks 256 cams- the other is stock but disassembled. Contact for further details...

Also have rb25 plenums etc and a few other things...

PM me for contact details or email dasblitz(at)calaisturbo.com.au

[VLSteve]

TTT