Jump to content
SAU Community

Recommended Posts

Only recently got this bonnet but I'm looking to swap back to the factory bonnet,
from the pictures you will be able to see that it's in fantastic condition, no
scratches or sun blemishes, my car is kept garaged at all times, It not driven
at all I have had no license for as long as I have been in possession of the
bonnet.

The bonnet has an intake for cold air above the turbo and 3 outlets for heat dispersion,
the bonnet also comes with a N1 lip.

The only issue with it is the chip out of the underside shown in the picture.


I'm looking for a straight swap preferably with someone who has the same colour as
my car.

I live in NSW also



bonnet4.jpg

bonnet1.jpg

bonnet2.jpg

bonnet6.jpg

bonnetcrack.jpg

Edited by geetea-are

I'll see how I go, but if I dont find some one to swap ill sell,

do you not have a bonnet you want to swap

i also want to keep my stock to swap on.

and its colour matched to a non factory colour.

good luck, if it doesnt come through( i reckon it will), let me know.

I've got a white stock bonnet I'm willing to swap, it's in pretty good condition.

Is it full carbon, Dry or wet? or is it one of those FRP ones with a carbon top on the thing?

im interested, where about in NSW are you.

My bonnet is yellow and in 100% perfect nick. let me know if you keen, i live 4 hrs west of sydney but have no problem coming to you.

Hey buddy

Ive got a silver perfect 32 gtr bonnet ill swap ya if the deal falls throu Im in sydney

Cheers

Memphis

Ahhhhhhhh!! Damn, that would of been perfect, I'm pretty sure he's very keen, he's driving 3 hrs

I take it this will one day get me defected if driving on public roads? Im super keen is there any way to make it legal?

yes, defected.

so far as i know, no way to make it leagal yet.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...