Jump to content
SAU Community

Camtech 272 Hydraulic Cams For Sale Or Swap

DanielH

By DanielH,
in Tasmania

 Share

Recommended Posts

DanielH Community Regular

DanielH

Posted
Posted

Hey guys,

Looking to downsize or sell my Camtech 272 9mm cams, only reason is i built my RB25 for my 32 to be really lumpy and sound tough, and also be revvy, but mostly for the idle.

But... the car got sold and the engine is now in my daily driven ute, and im really just after better turbo response and drivability/torque.

These cams will drop straight into an RB20, or into an R33 RB25 with aftermarket valve springs and retainers (which i have in my head), one of the reasons i bought them was to eliminate VCT to run the engine with an RB20 nistune.

I would really like to straight swap these for a set of cams in the 264 duration area, but i dont like my chances so i will consider selling them for the right price, and ill just go with some stock cams.

I would also swap these for a set of aftermarket cams to suit my GTR.

These can be heard running and i can easily remove the cam covers to look at the wear, they have done approx. 2000 km's since i bought them new, and were run-in to camtech's specs with penrite running in oil.

Contact on here or SMS me on 0408117171

Cheers,

Daniel

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • bcozican
      WTAC 2025

      By bcozican · Posted

      i will be there 😁
    • patrickxdf12
      Squeaking clutch/throw out bearing

      By patrickxdf12 · Posted

      Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Murray_Calavera
      WTAC 2025

      By Murray_Calavera · Posted

      Yeah mate, never miss it.
×
×
  • Create New...