Jump to content
SAU Community

Recommended Posts

Hey Guys,

I have a few stagea questions for the techs.

I have had cefiros, skylines etc but i got into motocross a few year ago so i downgraded to a old 88 triton..

recently i purchased a car i have wanted for a long time, a Stagea.

i have had it for a week today and i have a few questions for yas.

1.)Is there an over driver on and off switch for the automatic transmission??

2.) i always let it warm up before i drive, if i let it warm up for 2 minutes 30 seconds ( temp gauge goes to half way) is fine, but if i let it warm up for 30 seconds ( temp gauge hasn't moved) it cuts out??

3.) last night the AT light came on the dash and car wouldnt go into over drive, pulled over, turned car off then it was fine??

any ideas would be great guys

cheers

Kris

Link to comment
https://www.sau.com.au/forums/topic/420632-stagea-problems-please-helllp/
Share on other sites

Ok so it happened again. Driving today and AT ligjt came on . So I pulled over. Instead ogf turning on and off I stopped and took off again. It was like it was in 4th and was stuck. Sounded like it was slipoing but once I got speed was fine. The dash said it was changing gears but didnt feel like it.. so I stopped and turned it off again. Now its fine again . Does this soumd like somethibg major??? Just sucks coz cant get it to mechanics for another 3 weeks

I've only ever had a S1. I don't think you guys are talking about the O/D though, but the torque converter locking up after warming up. It'll go into O/D when cold but the converter won't lock up until the box reaches temp (kind of sounds like going into another gear though I guess). In winter I can almost get home before it'll lock up. But I don't think thats the problem here anyway. I don't know if the S2's have the A/T switch to go between power, normal and snow. But flicking it in snow will make it feel like that. Takes off in second from stand still. But I'm thinking its going into a limp mode for the gearbox. So could just be a sensor somewhere that on its way out or something more sinister. Explains why when you turn the car on and off it goes away.

As a suggestion, do this:

http://www.skylinesaustralia.com/forums/topic/266512-reading-nissan-fault-codes-ecu-fault-codes-how-read-them/

Have pen & paper ready.

It should give you an indication as to what could be at fault.

Clear the codes & see what happens. Sometimes, if there is a minor hiccup (e.g. slightly ill fitting harness plug) in a system somewhere, it logs a code. Even if the hiccup disappears, the code is still logged, so it can bring the light on & depending on how bad the ECU thinks the issue is, go into limp mode, like what's happening to you.

While this sounds more like a faulty sensor, have you checked trans fluid level? I know autos can get all funky when they are low.

And for christ's sake, don't warm up your car for two and a half minutes >< You're doing more harm than good.

Start it

Let it idle for 20-30 tops

Get going

Drive sedately until it's up to temp

ah ok fair enough then...

i only let it warm up that much once, usually is about 30 seconds, trans fluid looks ok but will double check levels tongiht i guess. going in to get checked soon i hope

Taking it to a work shop tonight hopefully. they didnt have the connections to run the tests last night so hopefully they have them today.

its been fine, the mechnic told me togive it a bit and i do today and the AT light came on twice =(, i had more of a play around and it seems to come on, ans be stuck in 3rd and 4th, and when its in 4th i decellerate drops to 500 rpm, again turn it off and fine, hopefully they can source the prolem today.

Hey guys, got it scanned today and its shift s/v a psw, so the shift solenoid has shit itself.

they quoted $500 approx not including oil etc..

anyone replaced one before? i know the sump has tto come out bud dunno what else has to be done

They would have to drop the valve body to replace the solenoid, $500 is a little expensive, but they did diagnose the fault and they need to warrant their work. If it fixes the fault I guess you got out of it cheap, a s/h box would cost a lot more than that fitted...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
×
×
  • Create New...