Jump to content
SAU Community

Recommended Posts

hey guys


selling off my project car r33 gtr i only really just bought it but have moved onto an r35 haha.. cant afford both, especially with r35 parts being as expensive as they are.


ALL PARTS LOCATED IN MACKAY NTH QLD, POSTAGE CAN BE ARRANGED


I CAN ALSO POSSIBLY TRANSPORT THE SHELL TO BRISBANE OR NEAR THERE PROVIDED I HAVEN'T SOLD THE WHEELS OR ANYTHING ELSE TO MAKE IT DEMOBILISED!! WILL ALSO NEED A MONTHS NOTICE AS ITS A 1000KM DRIVE AND NEED TO ORGANISE A TRAILER OFF MY MATE..


R33 Gtr mnp shell it is complied and DID have rego a couple years ago (nur33's old shell) - $1500


  • Front windscreen cracked
  • Stripped interior, not one bit of wiring harness front to rear
  • Front guards modified as per picture
  • Custom dash reo bar made
  • Custom alloy dash made
  • Sound deadening partially removed - just the stuff i could get with dry ice.. Some still baked on like around the gbox tunnel
  • Front radiator support cut out - was planning on welding a couple tabs to it then bolting it back on via the tabs
  • Lower front chassis brace cut out and replaced with a piece of tube to give the radiator more room and be able to have the intercoler sit upside down and have its inlet and outlet very close to the intake mani and turbo for short piping.
  • all fuel and brake lines have been removed
  • aerocatch bonnet pins
  • led taillights
  • will throw in the whole car loom and all ecus that i have.. loom is cut in a few spots and one ecu is damaged.
  • NO DIFF!!


additional parts to suit.. if you buy the shell the below parts will come at a discount depending on what it is you want.



  • r33 gtr BC External Reservior coils, as new only fitted and moved 50metres - $1350
  • r33 gtr black oem front bar, good condition paint is scratched a bit - $500
  • r33 gtr/gtst greddy front strut brace - $125
  • r33 gtr carbon fibre grill with no symbol just mesh - $100
  • r33 gtr rear wing, carbon end caps - $350
  • r33 gtr front lights very good condition - $350
  • r33 gtr/gtst cusco hicas lockout bars very good condition - $250
  • r33 gtr cusco front swaybar - $250
  • r33 gtr moonface racing castor arms - $200
  • r33 gtr passenger seat, good condition - $250
  • r33 gtr front drive shafts - $400
  • r33 gtr rear driveshafts - $500
  • r33 gtr front propshaft - $150
  • r33 gtr main propshaft - $300
  • r33 gtr rear strut tower/boot bracing, not the bar that goes from tower to tower but the bracing that bolts to the strut tower and boot floor - $150
  • r33 gtr bonnet, mnp with genuine uras bonnet vent - $450
  • r33 gtr interior panels, have a whole bunch of them, pretty much only threw out everything in the back half of the car and the dash - not sure what condition it is all in these days so if you want something i will have a look and see if its there then get back to you with a price.

Aftermarket Stuff


  • GTR Trust Drag intercooler 600x300x150mm, VGC, part of the end tanks chopped off for the different orientation i was planning while running it upside down - $1900
  • Stack 8130 dash - excellent condition has all loom, oil pressure and one temp sensor.. needs one more temp sensor to complete it - $1450
  • Full Set r34 gtr standard brakes with slotted front and rear rotors, rotors have been painted to keep rust off - $2000
  • AME TM-02 wheels, 18x10+15 all corners on 1000km old achillies 123s semis 265x35x18 - all very good condition no gutter rash - $2300
  • rochester 14mm 1200cc injectors x 4, never been used only fitted - $400
  • buddy club fixed back seat, has rail to suit s13/4/5. black with grey inserts for a normal sized person, has a small tear in the fabric other than that its as new - $450
  • sr20vet mazworx lhd or RHD without brake booster intake manifold, no fuel rail as new condition just needs a throttle cable bracket welded on - $500
  • s13 whiteline front swaybar good condition - $125
  • S14/15 K.L.S camber arms - $85
  • 2jz exhaust manifold 3d flange ready to make a manifold - $100



thats it for now..


please contact me (spencer) on 0413347774 or via pm

as requested, a picture of the bonnet. only one i have thats half decent.. i can get some better ones on the dslr tomorrow if you want? bit dark atm

also has aerocatch bonnet pins fitted now instead of the ones pictured and forgot to mention the n1 lip

DSC_0001-1.jpg

Hey

So far the rear driveshafts are gone and front bar, had intrest in the suspension and most likely sold the brake master cylinder.. Other than that it is still how it looks in that picture minus the autoselect lip..

Send me a pm and we can work a price out depending on what you want to come with it..

  • 2 weeks later...
  • 3 weeks later...
  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...