Jump to content
SAU Community

Recommended Posts

I have a unitig ac/dc 200amp thats a couple of years old now. Like already said, cant fault it. Welds great and heaps of functions to control everything. My hand piece has a wheel (like a mouse wheel) to control amps too.

Really great welder, so much that im looking at getting a unimig mig welder when the time is right

Link to comment
https://www.sau.com.au/forums/topic/421721-tig-welders/#findComment-6791354
Share on other sites

  • 2 weeks later...

I used to have a unitig200 as well.. was a great machine but have since moved to a token tools tig with a few more functions and can be had for around the same price.. The difference in weld quality was quite easy to see straight away.. Nothing wrong with the unitig whatsoever but id definitely go the token tools welder as they are pretty much the same price.

Link to comment
https://www.sau.com.au/forums/topic/421721-tig-welders/#findComment-6801926
Share on other sites

is this the token tools tig you have

http://www.tokentools.com.au/prod10.htm

Yep spot on, only thing i didnt like about the welder was the torch, make sure you upgrade to the variable amp control torch.. The button on the torch i have sticks down every now and then has made a few f**kups for me haha..

Link to comment
https://www.sau.com.au/forums/topic/421721-tig-welders/#findComment-6802446
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...