Jump to content
SAU Community

R32 Gtr Clutches!?

jun 2.7

By jun 2.7,
in Western Australia

 Share

Recommended Posts

jun 2.7 Enthusiast

jun 2.7

Posted
Posted

Hi guys I've been doing a lot of reading to figure out what new PUSH TYPE clutch I should buy for my 32?

At the moment I have 439hp and a not very old hks twin plate which drives nice but after a few laps on the track it starts to slip.. So before I go buying another new clutch again I was just looking to get some input and advice from fellow members as to what brands and styles have been used with good results and where the best place to buy them from etc etc

Any help into advice is greatly appreciated

Cheers ime

Link to comment
https://www.sau.com.au/forums/topic/422084-r32-gtr-clutches/
Share on other sites
3LGODZILA Proficient

3LGODZILA

Posted
Posted

read up on the npc twin plate thats what ive got (car is being built atm)

the flywheel is built into the clutch as one piece, they are pretty heavy also but very cheap to rebuild as its a thick piece of billet they can get skimmed and new plates put in, compared to rebuilding a jap clutch which will cost nearly as much as a new one

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Butters
      UniClutch

      By Butters · Posted

      Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • Rezz
      Japan Scrapbook

      By Rezz · Posted

      I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Rezz
      Duncan's V37.......race car?

      By Rezz · Posted

      Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Turbodoc
      Noobie Stagea owner..

      By Turbodoc · Posted

      Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...