Jump to content
SAU Community

R33 Headlight Plugs?

Kandikid

By Kandikid,
in General Maintenance

 Share

Recommended Posts

Kandikid Collaborator

Kandikid

Posted
Posted

So my current 33 is a 93 coupe ......shes gettin on and starting to show her age, and i decided it was time for a transplant.

I got hold of a 96 33 Sedan shell (complete minus engine box and front panels, headlights etc.) and over the last few months have been working my way over it, taking everything apart, cleaning it, replacing anything that needs to be, pretty much building it up into something i can be proud to say ive done myself.

Everything seems to be in order ready to move everything over, except the headlight plugs?

the sedan shell seems to have 1x H4 plug opposed to the coupes 2x h1's.

Can i cut this plug off and wire it into the S1 plug that has the 2xh1's?


hopefully that makes sense.

Thx

Link to comment
https://www.sau.com.au/forums/topic/422890-r33-headlight-plugs/
Share on other sites
Victory Mentor

Victory

Posted
Posted

The Series II sedans came with a different radiator support panel to all of the other R33's and different headlights (I have first hand experience with this doing a repair on a coupe and being sold a sedan support panel).

Your options are to obtain a set of Series II sedan headlights or replace the radiator support panel and then you can use Series I or Series II coupe headlights.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 gtr transmission strength, billet plate

      By GTSBoy · Posted

      Just put skinny tyres on it.
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...