Jump to content
SAU Community

Recommended Posts

First up, not sure if this belongs in this section, so bare with me.

i got a 95 R33 manual turbo rah rah rah,

bone stock engine wise and body, just has some coilovers and swaybars, braces etc.

Im having issues with the Battery going flat after 2 days of no use.

Ive replaced the battery, battery leads and terminals,

disconnected the stereo, disconnected the key hole light around ignition as it would stay on when door closed and locked.

boot light disconnect as ive read they can go faulty. removed the turbo timer as the screen shit itself and stopped working (was working great intill electrical gremlins came in)

i had to removed a lot of unused wiring from a car pc install, was wires taped into the cluster, and fuse box, random shit here and there.

from what i gather now its all bone stock wiring wise minus the alarm and boost gauge.

just seems everything electrical is playing up, is it normal for all the dash lights, and clock and stereo to Dim when light puts on?

I havnt tested the alternator to see if its charging, but i put a brand new fresh charged battery in and it was flat in 2 days.

Any idea's on what to check, how to do it would be great, worse case is ill drop it off at a auto electrician, but would rather try fix it myself if possible.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/422902-r33-electrical-gremlims/
Share on other sites

test your alternator my man. can do nothing until this is done.

Still doesnt explain why i freshly charged brand new battery went flat after 2 days of no driving. i literally put it in, turned key, it fired up. i shut it down and left it.

2 days later, wouldnt crank, just couple starter clicks. stereo worked for a second or 2 and then wouldnt turn back on. connect jump pack and it fires up like its a fresh battery,

i had the same problem years ago, it turned out to be a faulty relay staying energised even when key was out of the ignition = flat battery, id be checking this or any thing else related (as well testing alternator while your at it)

i had the same problem years ago, it turned out to be a faulty relay staying energised even when key was out of the ignition = flat battery, id be checking this or any thing else related (as well testing alternator while your at it)

Have read something to do with the ECU relays, ECU stays grounded or something and thinks its still on. so flattens battery.

I have bought a Multi meter, so will check battery and Alternator ASAP.

Battery tests at 12.65V fully charged

When engine running its 14.22V,

Drops to 9.57V on crank then bumps up to 14.22.

With lights on, AC on, stereo on, and anything else i can put on, and sitting at 2000rpm its 14.17V

after car is off, battery reads 12.57v

test for battery drain it was fluctuating at 0.05 to 0.07 and every 10 seconds or so it would bash up to 7.00, this is testing on a 20amp setting on multimeter with the multimeter between earth cable and earth terminal on battery.

Disconnected the 4 fuses for the Alarm, it sat at a steady 0.03,

Removing the what i believe is the power window fuse from under bonnet it drops to 0.01-0.02

Removing the fuse labeled "electrics" going buy a engine translated picture it drops to 0.00 which im assuming is no battery drain what so ever.

If anyone can shed some light on this, then great stuff

yeah thats what causes most of the drain Mate, 2 posts up i said i removed the 4 fuses for the alarm, guess i should have put its a immobiliser as well haha.

My other R33 reads 0.03 drain and it never goes flat, even after no start in 2 weeks. so in theory the 0.01 from this 33 should mean it shouldnt go flat.... "shouldnt"

Odd thing is i had removed the fuses to alarm/imm over the weekend and it was still flat.. hmm.

Edited by DAN-33

yeah thats what causes most of the drain Mate, 2 posts up i said i removed the 4 fuses for the alarm, guess i should have put its a immobiliser as well haha.

My other R33 reads 0.03 drain and it never goes flat, even after no start in 2 weeks. so in theory the 0.01 from this 33 should mean it shouldnt go flat.... "shouldnt"

Odd thing is i had removed the fuses to alarm/imm over the weekend and it was still flat.. hmm.

Sorry mate, didn't see that post re: the immobiliser. I never really got a "fix" for the immobiliser problem (just assumed it was a power hungry immobiliser) so I just had it on a smart-charger for most of the time (rarely drove the car in the end prior to selling. Maybe a couple of times a month?).

Sorry mate, didn't see that post re: the immobiliser. I never really got a "fix" for the immobiliser problem (just assumed it was a power hungry immobiliser) so I just had it on a smart-charger for most of the time (rarely drove the car in the end prior to selling. Maybe a couple of times a month?).

STILL CANT BELIEVE YOU SOLD IT........

trace all wires back from the alarm mate. disconnect and tag them so you know what goes where. leave it as usual and see if battery discharges. only way to do it really.

also id check the size of your battery. i have some funky jap spec pager alarm on mine and have never had this issue....

yeah alarm is all disconnected and has no power to it, im hoping anyway.

Battery is new, 330cca, unsure of the other numbers though, bigger then the previous battery i know that much.

Im guessing the alarm spikes every few minutes when connected and slowly drains battery, as starter just clicks after 2 days

STILL CANT BELIEVE YOU SOLD IT........

trace all wires back from the alarm mate. disconnect and tag them so you know what goes where. leave it as usual and see if battery discharges. only way to do it really.

also id check the size of your battery. i have some funky jap spec pager alarm on mine and have never had this issue....

Yeah, I know. Miss that car heaps :( apparently the new owner blew the head gasket, which is unfortunate. Hoepfully it gives him the chance to build it bigger and stronger.

yeah alarm is all disconnected and has no power to it, im hoping anyway.

Battery is new, 330cca, unsure of the other numbers though, bigger then the previous battery i know that much.

Im guessing the alarm spikes every few minutes when connected and slowly drains battery, as starter just clicks after 2 days

Bit of a band-aid solution but maybe jsut keep her hooked up to a trickle charger until you can get the alarm/immobiliser checked out. The chargers are about $70 or so from Ricebarn so def. a good investment in my eyes :cheers:

  • 2 weeks later...

Replaced the alarm module with a new one, same brand so plug and play.

seemed good for a week. Battery was flat again this morning.

Getting a 0.02 that flutters to 0.03 and 0.04 reading on multimeter for the battery draw.

Should that number be solid? and not flutter?

Im about ready to drop it off at a auto electrician, its near doing my head in.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...