Jump to content
SAU Community

Recommended Posts

hey guys first of all, i could find an introduction area on this forum, did i miss it?

anyway, il do it in here. ive previously owned 2 wrx's and an evo vii, which i recently sold and now just have a 99 civic auto coupe to run around in :) . it didnt take long to get bored... i originally wanted a gts-t before my first wrx, but didnt even test drive one, and just bought the rex.

so i joined here to see what could be had for the 6-7g mark when it comes to r33/r32 gts-t's, my impression of gts-t's is that they were slow, but i think i have just come across the poorly moded ones, which there seems to be alot of! (lots of bolt ons with no tune), dont even get me started on the cosmetics of some on carsales!

so, if you had 6-7 to spend, what would you look for?

Link to comment
https://www.sau.com.au/forums/topic/423628-cheap-gts-t-s/
Share on other sites

Welcome to the forums dude! I picked my R33 Gts-T for 7 grand, fairly stock, FMIC, pod filter and walbro 255 fuel pump. Then I bought myself an RB20 wastegate actuator (runs 10psi not 7psi like the stock R33 ones) and an EBC which is running 10psi low, 12 high. Got a NIStune and dyno done by garage 7. Makes 209kw on 10psi, as for if it's slow or not, I guess it just depends what you're use to.

Link to comment
https://www.sau.com.au/forums/topic/423628-cheap-gts-t-s/#findComment-6817332
Share on other sites

but there are also stock ones for around 11-12. are these dreamers or ?

If they're 100% stock, they're dreaming unless if has like under 100,000 geniune km's on it. Or unless it's a later like 98' series 3 R33 Gts-T.

Link to comment
https://www.sau.com.au/forums/topic/423628-cheap-gts-t-s/#findComment-6817335
Share on other sites

but there are also stock ones for around 11-12. are these dreamers or ?

Definite dreamers.

As per PM, I have a R33 Series 1 GTS-T, faily stock, has aftermarket 3" exhaust system with front mount intercooler. $5K, also very clean turbo manual. I've wrecked a few R33's and seeing the price for them, any stock R33 over $7K is overpriced. $7K should be able to get you a very nice clean one if stock. $7K+ should have some nice performance parts in it, fair amount of Ks and at least 6 months of rego.

True story: Had a guy offer me his R33 GTS-T, extremely modified, wanted $45K for it. May as well buy a 34 GTR :whistling:

Link to comment
https://www.sau.com.au/forums/topic/423628-cheap-gts-t-s/#findComment-6817373
Share on other sites

just found a topic a few down from mine which is almost exactly the same reg a guy buying his first turbo car for 6-7g, lol.

what i gathered fro reading through that is an R33 gts-t is probly the best bang for buck, i think reson 32's are goin for higher is because there arnt that many!

Link to comment
https://www.sau.com.au/forums/topic/423628-cheap-gts-t-s/#findComment-6817451
Share on other sites

but there are also stock ones for around 11-12. are these dreamers or ?

HAHA definitely dreamers. R33 gts-Ts are like Commodores. There's tonnes of them everywhere, they're getting to be really old cars (15-20 years old) and a lot of them are poorly looked after. For this reason YOU have the ability to decide the market price. They're worth peanuts (probably in the range of 3-7k) and anybody who tells you otherwise is probably the owner of a GTST trying to sell it :O

Link to comment
https://www.sau.com.au/forums/topic/423628-cheap-gts-t-s/#findComment-6821644
Share on other sites

Mine. :-)
R32 Type M

Stock. All mods are for handling with a full 3" exhaust.
That's it.


Does go hard for no reason though. lol

Paid 7.
Neat interior.
minor paint peel.
Mine came with a logbook and all aussie receipts too.
Has new rear 1/4's too. :-D


Edited by RBMunkie
Link to comment
https://www.sau.com.au/forums/topic/423628-cheap-gts-t-s/#findComment-6824680
Share on other sites

How long is a piece of string?

As mentioned before, the way the car has been looked after can make a world of difference in value. Modifications matter, history matters.

A clapped out, rusted example is going to vary hugely in price from the well documented and cared for example.

I've got my R32 GTS-T for sale for 6.5k firm and I've actually had a harder time moving it than I thought, considering the condition and what I've spent. But that's just life.

Link to comment
https://www.sau.com.au/forums/topic/423628-cheap-gts-t-s/#findComment-6825155
Share on other sites

Here's one for you.. Bought my 1993 R32 gtst Type-M for $9500.... Lol, I know..

That's not even the bad part..

287xxx kms (Suppoasbly 150xxx but doubt that)

Took off the bodykit to a shit load of chunks missing and rust underneath... More than my 83 corolla.. Since then I've spent about $2000 and its still getting nowhere

Oh and my interior is pretty dodgy.. I got a new dash, 550cc injectors an yellow jackets included in the boot, plus other things I have no idea about

Edited by Zrobe
Link to comment
https://www.sau.com.au/forums/topic/423628-cheap-gts-t-s/#findComment-6825188
Share on other sites

Definite dreamers.

As per PM, I have a R33 Series 1 GTS-T, faily stock, has aftermarket 3" exhaust system with front mount intercooler. $5K, also very clean turbo manual. I've wrecked a few R33's and seeing the price for them, any stock R33 over $7K is overpriced. $7K should be able to get you a very nice clean one if stock. $7K+ should have some nice performance parts in it, fair amount of Ks and at least 6 months of rego.

True story: Had a guy offer me his R33 GTS-T, extremely modified, wanted $45K for it. May as well buy a 34 GTR :whistling:

Yep there is a lot of overpriced Skylines out there at the moment.

I have my eye on a GTS-T at the moment for 8k (with rego) with a rebuilt motor, nistune, nismo injectors, high flowed turbo, front mount etc.

So to me anything more than 7-8k is dreaming for anything close to stock.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/423628-cheap-gts-t-s/#findComment-6826097
Share on other sites

Yeah, as Truffles said, even though R32's are getting rare - most of them are clapped out.

I spent MONTHS looking for my R32.

Outside it ain't perfect.
But all rust has been repaired and has no collision damage or previous repairs.


R32's were destroyed by the "Leb spec" phase.

There is several ok looking GTR's going for 12 grand.
A white one going around at the moment.
Needs love - but damn, rego and a GTR title for 12K?
Might be worth it with a little love.

Cost a bit more to fix up than buying a GTR at 20k, but you'd be saving a GTR.
That's how I see it anyway. lol


Goodluck on finding an R32, I just took out a loan to consolidate all my debts in one hit so I can keep mine (Stupid medical bills.)
So I guess that shows how much I love my clean '32. :-P

Link to comment
https://www.sau.com.au/forums/topic/423628-cheap-gts-t-s/#findComment-6827052
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...