Jump to content
SAU Community

Recommended Posts

Thought I'd make a thread where we can discuss our injuries in depth and offer non-professional advice for rehabilitation/prevention; keep track of exercise-affecting ailments etc.

I'll put a little disclaimer here that, any advice given in this thread (and the H&W section as a whole) should always be taken with a grain of salt and exists merely to provoke thought/possibilities. Most of us are not health professionals (though we all like to offer advice) and there is no substitute for consulting a health professional in real life who can physically test/scan for and recommend an appropriate course of action for the management of injuries.

We have a heavy focus on weightlifting here in this section; many of us able to relate to exercise specific injuries and rehabilitation methods, which means we can at least lead people in the right direction...whether it be recommending athlete-specific professionals or offering support to each other during tough times.

seasick_bandaid_17sb3c2-17sb3ks.jpg

Link to comment
https://www.sau.com.au/forums/topic/423699-the-infirmary/
Share on other sites

  • Replies 160
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

my knee is farked. squats don't help, it creaks and clicks and cracks and sometimes 'unlocks' if i do a specific movement and i'm too lazy to see a doctor about it....if i sit with knees at 90 degrees sometimes on bad days it will feel like pressure is building up inside and i just have to straighten it out. oh and i've had this for 5+ years but it doesn't stop me from playing sports.

not looking for advice thought i'd just start things off.

Link to comment
https://www.sau.com.au/forums/topic/423699-the-infirmary/#findComment-6818684
Share on other sites

my knee is farked. squats don't help, it creaks and clicks and cracks and sometimes 'unlocks' if i do a specific movement and i'm too lazy to see a doctor about it....if i sit with knees at 90 degrees sometimes on bad days it will feel like pressure is building up inside and i just have to straighten it out. oh and i've had this for 5+ years but it doesn't stop me from playing sports.

not looking for advice thought i'd just start things off.

I have the same problem.

Squats might not help, but Squats is the right thing to do.

Rev - post up your shoulder/scap rehab stuff in this thread.

Link to comment
https://www.sau.com.au/forums/topic/423699-the-infirmary/#findComment-6818880
Share on other sites

Rev's shoulder rehab stuff would be pretty useful on the first page. I can add it to the first post if he wants to send me a summary of it.

We all know I have a shoulder problem at the moment. GP saw the ultrasound and is adamant its just inflammation/sprain of the supraspinatus. I personally call bullshit and will be seeing a physio about it for a second opinion. The anti-inflams are helping more each day, but are starting to plateau in what they can do for me, which makes me worry a bit, that there is an underlying issue and that's why the supraspinatus turned to shit in the first place.

Also had a blood test and I am vitamin D deficient at 66%. So vitamin D tablets to add to my collection of daily popping. Only a couple years ago I swore I would never take pills for anything...now I'm on 4 a day at age 26 lol

Link to comment
https://www.sau.com.au/forums/topic/423699-the-infirmary/#findComment-6819900
Share on other sites

Also had a blood test and I am vitamin D deficient at 66%. So vitamin D tablets to add to my collection of daily popping. Only a couple years ago I swore I would never take pills for anything...now I'm on 4 a day at age 26 lol

66% ain't no thang!

Mine was down to about 33% at one stage and it started messing with my cognitive function and immune system real bad. Got sick all the time an I was so slow to process things, was real worrying before I knew what the issue was!

Link to comment
https://www.sau.com.au/forums/topic/423699-the-infirmary/#findComment-6820248
Share on other sites

Today's leg session went something like this:

1x squats 60kg warm-up set, 8 reps

1x squats 100kg set, 8 reps

2x extra strength codeine tablets and 2x ibuprofen tablets

1x sit around in pain set

Proceeded to smash some 1 legged leg press sets @120kg before cracking the shits and going home.

I'm fairly sure this is a result of partial dehydration thanks to neglecting water through the day more than usual :(

Link to comment
https://www.sau.com.au/forums/topic/423699-the-infirmary/#findComment-6820335
Share on other sites

  • 2 weeks later...

Thought i would post in here for a bit of advice.
Just got news that i have had a shoulder subluxation or partial subluxation after going to my GP. Wont know how bad it is till i get my xray and ultrasound done tomorrow.
Has anyone had anything similar? Kinda looking for a bit of rehab advice/motivation? Pretty miserable at the moment.

Link to comment
https://www.sau.com.au/forums/topic/423699-the-infirmary/#findComment-6831578
Share on other sites

Now that helps heaps. Thanks.

I just realised I am not benching properly at all ie the bodybuilding bench in part 1! No wonder my shoulder is stuffing up more regularly now. That's actually pretty good as I can now improve it and hopefully find some extra strength using the powerlifting method.

Link to comment
https://www.sau.com.au/forums/topic/423699-the-infirmary/#findComment-6831609
Share on other sites

66% ain't no thang!

Mine was down to about 33% at one stage and it started messing with my cognitive function and immune system real bad. Got sick all the time an I was so slow to process things, was real worrying before I knew what the issue was!

Yeah same. Mine got down to the low 30's (in combo with low iron and low calcium) as well and it started messing with my cognitive function, immune system and energy levels. Felt like a total Zombie.

you can get vitamin D for free... go outside

anti inflams are shit when used long term... be careful with them

Anti inflamms can screw with your Gastro intestinal tract long term. Should always be taken with food.
Link to comment
https://www.sau.com.au/forums/topic/423699-the-infirmary/#findComment-6832394
Share on other sites

Two areas that are most common and also connected. Shoulders & Thorasic ROM and strength.

I am doing work on some pretty awefull thorasic ROM I have (people who do office work syndrome). My shoulder ROM is getting better but, I haven't been putting in the time I should. I know what it's like to have it right on both fronts so trust me it's worth it getting back there.

Tests are on the web to look at. Here's a basic one for thorasic.

  1. Lie down on the floor, back flat against it.
  2. Your knees should be up with your feet and glutes flat on the floor.
  3. Lock your elbows and bring your arms directly overhead, attempting to touch your wrists to the ground above your head.
  4. Make sure to maintain contact between your lower back and the floor; don’t arch your back to get your hands in place.

If you can’t touch your wrists to the ground, you have poor thoracic mobility. To put a scapular variation on this , point the thumbs up and try and touch them on the ground.

This should be completed with no strain. If you have any pain or discomfort don't push through it, just work out where you end up, that is your baseline.

For shoulders two basic tests ;

Test A -- position

1) grab a couple of pencils or sticks in each of your fists.

2) raise the arms straight ahead of you so that the sticks point upwards

3) now let the arms just drop totally relaxed, don't control the decent at all.

4) note the angles of the pencils/sticks.

5) If they are both pointing straight ahead and parrallel to the floor then it's good. You might find them pointing slightly downward and inwards. If so shoulder work probably needed. One may be on more of an angle , that shoulder is worse.

6) Notice the difference if you concentrate on good posture shoulders back etc. Rather than work into this position you need to relax into it.

Test B -- ROM

1) Reach behind the head with one arm (palm facing the back and touching in between shoulder blades.

2) with the other arm reach up from underneath palm outwards and try to link up the fingers.

* Fingers touching or being able to monkey grip = good

* Fingers just touching = ok

* 2 inches away = need work

* More than two inches = bad

If you fail at the above then bench press will simply bitch slap your issues into progressively worse condition. Bench press is something people should consider alternatives for unless they are biomechanically designed for it or need to do it for competitions. You can build pecs without it but, if you are going to do it, then consider being fit for it in the first place.

Link to comment
https://www.sau.com.au/forums/topic/423699-the-infirmary/#findComment-6840259
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Great work! Give it a clean up with some Emery paper, and I'd run a thread die over the threads too to clean them up. It will make reinstall much easier, and also life easier for the next time it needs to come out.
    • I'm not a fan of high humidity, it's one reason I don't mind being further inland out Ipswich, except the last 3 odd years, the drought broke, and it won't stop raining, which is making the humidity nearly unbearable when the rains are in during summer! For me, my body hates the cold, once the cold sets into my body, I'm totally screwed. I end up with severe muscle spasm in my back/shoulder muscles, and it feels like someone is trying to tear the muscles out. I have no issues with it getting stupid hot, so long as the humidity goes away. So the last 3 years as above, have been woeful! Ha ha. However, June 1st, and I'm only just converting from shorts and a tee, to long pants and a t shirt. And that's mainly as it's a bit wet and miserable and I wanted to work on a car.
    • I much prefer colder weather to hot weather, and especially prefer cold to hot and humid, Goulburn does gets pretty warm in the hotter months, but, I've found the humidity there is not as painful as even Sydney, the humidity up north is to oppressing for this old rooster  In saying this, it does get rather "nippy" in Goulburn for early morning, late in the evening walks, but nothing that a layer or two, some thermal gloves, and a beanie doesn't fix to make it an enjoyable experience, which is much more bearable to me than the oppression of heat and humidity,  especially at night when your trying to sleep If I recall correctly, a "wise man" once said that the "Southern Tablelands" was gods country, and I will not argue that point with him for the fear of a "permaban" LOL In car part related news: My intake is currently in Botany getting processed for the last leg of its shipping journey to my door   
    • Had a go at the stuck crush tube this afternoon. Tried things like grips and a chain wrench first but wouldn't just twist straight off. So got to work with a drill. Started small and kept a depth stop on to make sure I didn't drill into the bolt. Made a line of drill holes all the way up and enlarged them. Then a combination of chisel and Dremel to split it all the way up. Levered the split to get oil in there and eventually it gave a bit while levering. Worked it back and forth with loads more oil till it was spinning freely, then with grips I could work it downwards and off. And no significant damage to the bolt (not by me anyway - just the 27 years of rust)
    • Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
×
×
  • Create New...