Jump to content
SAU Community

S A U - N S W Texikhana - Queen's Birthday Holiday Monday


Recommended Posts

I'll come to check out this Texi thing, all new to me. Anyone can give me a ride along?

Also that soundtrack in the video makes me cringe.

I'll be there to help out in the morning if you'd like a lift Ricky.

And thanks R-o-B for helping out too :)

I'll be there to help out in the morning if you'd like a lift Ricky.

And thanks R-o-B for helping out too :)

Thanks for the offer Terry, but I meant if someone could offer a ride along in their car during Texi to get a feel for it. Unless you'll be taking the N1 for some donuts then I shotgun! ;)

Going to see if I can get leave for this.

Got a plumb back for the gate. And some tyres I need to get rid of. :)

It feels so cruel plumbing back the gate :(

With rego? =-o

Rego would be good! Found a couple of decent S13's which fill the shitbox skidder requirements very well.

The Merc truck might be a bit of fun on the skidpan :P

Rego would be good! Found a couple of decent S13's which fill the shitbox skidder requirements very well.

The Merc truck might be a bit of fun on the skidpan :P

This i wanna see!

Rego would be good! Found a couple of decent S13's which fill the shitbox skidder requirements very well.

The Merc truck might be a bit of fun on the skidpan :P

I recken that would make a good SAU "rego trailer" or something ;oD

Sorry - haven't had time with work.

Will try and get something happening on the weekend and will respond to everyone who's entered. More people are always appreciated, there's still spots.

No need to apologise man :) If there is anything i can do to help just send me a PM!

I'm going to do lid skids all day!

Be rude not too!

I'll be helping only on this one.

Going to see if I can get leave for this.

Got a plumb back for the gate. And some tyres I need to get rid of. :)

Do it.

Might try come down in the Stag for this. See how we go :D

Would be good to see a C34 that can do real skids !

Guest
This topic is now closed to further replies.



  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...