Jump to content
SAU Community

(Sa) 1999 Series 2 Legnum Vr4

vr4sthoz
 Share

Recommended Posts

vr4sthoz Rookie

vr4sthoz

Posted
Posted (edited)

I am looking at selling my 1999 Mitsubishi Legnum Type-S
Very low K's 60***

2.5 lt V6 Twin Turbo
5sp Auto triptronic
Active Yaw Control
Factory Recaro Seats
Massive Moon Roof
Momo Steering Wheel
Hi Vis Dash
Pioneer Double Din DVD player/Alpine 6" splits all round with 2 10" alpine boxed subs and 2 Clarion Competition amps.
Factory Floor Mats
Fujitsubo 3" Legalis cat back exhaust
Walbro 255lph Fuel pump
Massive Transmission Cooler
After Market Front Mount Intercooler(biggest that would fit)
recently tuned By TME(14 psi tune)
Serviced every 5000 ks by Jon at Driven Motorsport
18x9.5" Koya RG-teks with new federal 595 tyres.NO scratches/scrapes on any of the wheels
Only one in Australia(that i have seen) with a Vogue Grill.
Just renewed rego
I have looked after this car extremely well...

All work done to this car since it has been in Aus has been carried out by Jon at Driven Motorsport

Car was imported by ICI

Just had a Dyno tune and ecu flash by Tranformance Mechanical Engineering in NSW


Only contemplating this due to other circumstances....

Looking at 14.0k

Or looking st swaps for V35(same sort of K's prefer auto)

Toyota Aurion,Caldina.
Shane 0435767704

img1164s.jpg
img1155wh.jpg
20121023150416.jpg
20121023150407.jpg
20121023150347.jpg
763o.jpg
417ri.jpg







Edited by vr4sthoz
Link to comment
https://www.sau.com.au/forums/topic/424038-sa-1999-series-2-legnum-vr4/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • MBS206
      new 1.5 LSD issues/concerns

      By MBS206 · Posted

      Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...