Jump to content
SAU Community

Stolen: White Wc34, Neo 2, Rb25Det Manual

mely1200
 Share

Recommended Posts

mely1200 Explorer

mely1200

Posted
Posted

Hey guys,

Went missing in the Moonee Ponds area, in the early hours of 1/05/13.

Reward paid for information leading to an arrest.

If you see any of the Stag specific parts:

Dolphin body kit,

double hinge center console,

rB25Det bolted to a 4wd hicas box.

Will repost in the skyline forum as well.

Still had the baby seat in it and some toys.

Give me a heads up by:

PM or

0402335586 or

[email protected]

Cheers,

Mely

Daleo Grand Master

Daleo

Posted
Posted (edited)

Post up a pic; maybe with the numberplate.

A pic will jog memories much better than text.

Best of luck cobber, hope it turns up undamaged.

Edited by Daleo
  • 3 weeks later...
RBPOWA-(TJ) Grand Master

RBPOWA-(TJ)

Posted
Posted

Hey Dude, i live in Moonee Ponds, amongst all the euro sports cars the stageas stand out... seen a heap of grey and black, yet to see a white one though

Photos and rego would help alot otherwise its just another Stagea

mely1200 Explorer

mely1200

Posted
  • Author
Posted

Wasnt expecting this... but we got it back!

Police were chasing him in association with credit card fraud apparently.

Drivers door lock and ignition barrel broken (can open/start with a teaspoon) The Hicas & ABS fuses were pulled, the handbrake stretched to the stop, the gearbox was really tight, now its pretty sloppy and he put 4,500 km on it in 3 weeks! Front and rear bars trashed, tore the airbox out, changed the BOV for a noisy one (left the stock one in the wheel well) stole the spare, changed the rear rims (now not matching, were stock nissan) and tore the center console out. The power steering pump is howling now too.

Baby seat gone, my kids toys and books all gone, seat covers gone, maccas in the passenger footwell, ashtray full (in 3 weeks!?)

But, it drives, and apart from the headlight its roadworthy. Probably needs brake pads and a clutch pretty soon.

Wasnt expecting a happy ending to this story, should have it cleaned up over the weekend if I can find the parts.

Cheers fellahs,

Mely

Daleo Grand Master

Daleo

Posted
Posted

Good to hear you have it back, but make sure you haven't got back a shitbox. 4500km is plenty of time to wreck a car.

I'd be getting a trusted specialist to go right through it; to ensure you don't end up footing a bill for thrash related repairs down the track.

Complete fluid flush (diffs, gearbox, coolant, engine oil, brake/clutch fluid etc), and a full going over.

Hope they catch the f**ker.

GTR-N1 Grand Master

GTR-N1

Posted
Posted

From what I can glean, I suspect that your car was used in or groomed for a robbery/ram raid.

Have you got any speeding tix in the mail yet?

As Daleo and OS80RN alluded to, everything needs to be checked out. The gearbox condition indicates a thrashing.

mely1200 Explorer

mely1200

Posted
  • Author
Posted

Hey stagnuts,

Checked my recipts, he only put 1200k on it. I thought it went out with 87,200k on it, but it was 89,200k.

Yeah, look i got it with 75,000 on it from Japan. The car was like new. The gearbox makes no noise and its not popping out, its just not as tight as it was...

Yeah, they caught the guy, his mobile number is on the back window under "for sale" in paint pen... The detective is away, I will see what I can get back when she gets back to work. My insurance got sent to my old work address, I was 10 weeks uninsured, so that's all I can do to get cash back.

Will chase down the parts (Passenger side light, locks, change BOV) and fluids (Box, engine, brakes) and do a better job of the immobilizer to get it moving for the Mrs and my bub. Probably pull it off the road in a month and do the brake pads, handbrake cable, diffx2 oil and clutch. Nice to have would be matching rims, it has 3x different kinds of rims on it at the moment and i might put on a carton and get the boys around to do some lazy BBQ, beers and fiberglassing on the bars...

Keep you updated,

Mely

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...