Jump to content
SAU Community

Recommended Posts

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

Snowman - we shouldn't laugh at retards in vl's, even though there everywhere on our roads.....

banned_leb - don't you think you're barking up the wrong tree??? We know your immature and looking for trouble, please keep it over there in Altona....

Guest INASNT
must be really hard for u guys huh...

lossing to retards all the time..

:) u make retards look smart

And what exactly are you beating us with??? a car that has to come on a trailer, run slicks, transbrake, sit on the start line for 10 seconds spooling your stupidly large turbo that has a 1000-2000 rpm power band, suspension that you can only drive in a straight line with and a powerglide or other gay auto trans because you are to retarted to drive a car with manual trans, road tyres, and a thing called a clutch that you can drive home after racing and drive to work the next day???

Stop comparing a drag car to a street car retard.

If you only had a clue in life you would be dangerious

one day mate.. and i got CNBLOW to prove it.. im not scare dto walk up to some one..  

just lucky it wasnt u . for both our sacks. i didnt feel like being locked up

what you used to the prison showers or something lol... :jk:

Guest INASNT
alrite man, your all hard now cause you drive skylines and need to post pictures bagging vls cause u cant beat em.  sell your shitboxes and get vls cause thats the only way u will run sik times.

do you actually still think any of us actually car about beating a shit box vl at the drags who has to run slick, auto box and transbrake and go home on a trailer???

If you do you are more retarted that i first thought!!!!

ROFL! What a slug! Id be embarresed :)

What kind of 60 foot times?

Yeah I guess it is an embarrasing time considering a few vl's were running 10's and 9's, but fortunately I'm not willing to drive around a boat that's got a NISSAN motor in it..... maybe with slicks, a shit load of boost and 2 speed powerglide, I might get into the 10's aswell......

60 foot times were in the 1.9s

I just got off the phone with acsplit, Ryan took his 31 Ti to Calder and I just got confirmation that he ran a 11.94 on street tyres!

FWOAR!!!!!!!!!!!!!!!! :headspin:

Congrats to Ryan and crew, and we'll be seeing you on FullBoost! :D

I just got off the phone with acsplit, Ryan took his 31 Ti to Calder and I just got confirmation that he ran a 11.94 on street tyres!

FWOAR!!!!!!!!!!!!!!!!    :headspin:  

Congrats to Ryan and crew, and we'll be seeing you on FullBoost! :D

15" 205 shitty old bridgstone G grid tyres and boost set @ a safe 15psi full street trim :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
    • Could be correct. Meter might be that far out. Compare against a known 5 ohm 1% resistor.
    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap.  (edit: I went out and did it right now, the line I had chosen did appear to have no vacuum on it, it used to go to the front of the intake, I've now completely blocked that one off at the bracket that holds several vacuum lines by the firewall.  I T'd into the vacuum line that goes from that bracket to the vacuum pump at the front of the car, but no change in the MAP readings).  Using the new vacuum line that has obvious vacuum on the hose, im still only getting readings between -6.0 and -5.2.  I'm wondering why the ECU was detecting -5.3 when nothing was connected to the MAP nipple and ECU MAP selected as the source. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
×
×
  • Create New...