Jump to content
SAU Community

Recommended Posts

Hey all,

A while ago the RHS inner guard liner / splash guard clips fell out whilst I was driving and the liner rubbed against the tyre - which wore a nice hole it in.

Ive found a replacement but its from a series 1. So i'm wondering if there is a difference between the Series 1 and Series 2 guard liners / splash guards? and if they are a straight swap?

Anyone able to confirm if they will fit?

Cheers

Adam

Cheers for your reply mate. I actually didnt think to check for a part number on it LOL

Although I just had a quick squizz... where the tyre wore a hole in it, is right where the part number was. I've manged to get a few numbers off it - not sure if its a full part number or a partial though:

P/N : 3844 26U00

Thats the original off my R33 (Series 2) and the one I've found as a replacement is off a series 1 R33

Any ideas?

Cheers

Adam

Thanks for the reply H4x :)

I'm not sure if thats the part number or not, unfortunately when the guard fell down (whilst driving) the tire has worn a hole right where the part number is/was

Of the numbers I could see/make out, I got: 3844 26U00

Is there a different part number for the left / right sides?

Cheers

Adam

Thanks for the reply H4x :)

I'm not sure if thats the part number or not, unfortunately when the guard fell down (whilst driving) the tire has worn a hole right where the part number is/was

Of the numbers I could see/make out, I got: 3844 26U00

Is there a different part number for the left / right sides?

Cheers

Adam

S2:

RHS=63844-26U00-

LHS=63845-26U10-

S1:

RHS=63844-15U00-

LHS=63845-15U10-

As you can see they are different part numbers. Whats the difference between the two? I don't know. Just get one from a 96-97 coupe or sedan non GTR and check the part number matches.

Edited by H4x

Awesome, Thanks heaps everyone for your help - and thanks H4x for the confirmation and part numbers!

Indeed it is correct that they are not compatible and are different. Once I had the part numbers for both S1 and S2 I came across this post (here) which had these pictures in it, which shows the difference between S1 and S2 splash guards

Now im trying to find somewhere that I can get a replacement (Have been watching ebay/gumtree/for sale section of forum - but they are usually over east australia or from a S1)

I came across a website called amayama that sells them apparently? Anyone had any experience with them? (Link Here)

Cheers

Adam

post-12947-0-85202200-1369211559_thumb.jpg

post-12947-0-40833800-1369211563_thumb.jpg

I converted a Series I.5 to a Series II and the liners are different due to the different shape of the front bar.

I have purchased them from Just Jap and Nussan Aus for about $70 each because you can never find them second hand when you need them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...