Jump to content
SAU Community

Recommended Posts

Hi there, I've searched and searched... Anyone know where I can order a HFC for my 2003 coupe apart from b2auto or conceptz over in the states?

B2auto only stock the berks and conceptz only have kinetix and berk... I want some more choice such as Cnt racing or stillen.

Anyone dealt with any other USA suppliers or local sellers who sell HFCs ??

Thanks

Link to comment
https://www.sau.com.au/forums/topic/425785-anyone-know-where-i-can-buy-a-hfc/
Share on other sites

Why do you V guys want every modification to be an off the shelf, brand name, bolt on affair? There are 1000's of fabricators out there that can custom make you decent high flow stainless cat/decat pipes without the high markup and shipping buying from the US brings, and that way it will fit better as LHD designs rarely work well.

After fitting up a Stillen twin stainless system for a customer, I was very disappointed with the quality and the materials. (the flanges were't even stainless, they were mild.) I would think twice about using their HFC's.

OP, surely you haven't tried that hard. Z1 Motorsports would have to be the largest US seller of V35 stuff although they do smash you on shipping for orders under $1k.

Whilst I have a set of Berk HFC's on my car (straight bolt on, no probs and surprisingly a very high quality unit), I do agree with Scott. Wouldn't be difficult for a decent fabricator to make up a nice set of HFC's for you. Could work out cheaper too.

V35's really are an easy car to work on/with. Anyone that tells you otherwise shouldn't be let near a car.

Also agree on that Stillen exhaust. Sounds nice but what a pain in the arse POS to fit.

  • Like 1

Hi scotty,

Personally I wanted a brand name cat because most of them claim they do not mess with the sensors so that I will not get a check engine light once installed.

Put it this way if someone could fabricate a pair of cats for me for under let's say $400 (the price of a pair of cnt cats delivered) which won't foul the sensors I would be more than happy to buy from them, until then I'm stuck with looking for brand names from the USA as my old cats are pretty gutted and broken.

Hi iamhe

Personally I've never used z1 before so I might ask them for a quote, I got quoted around 550 delivered for the berks from the other 2 vendors which is out of my budget, that is why I am looking for some other vendors who stock different brands so I could compare.

But if I could find someone who can fabricate a pair of cats for me locally for a better price of course I'd go with them.

^ Agree.

Just wait a little longer and get some Berk's.

Also interested as to which HFC's give the CEL and why they would do so?

I was told it is because more air is flowing through so it tricks the ecu that something is going wrong. I heard also that the Berks throw a check engine light, is this true in your case?

The CNT racing ones I enquired about have a extended bung for the sensor welded on so I was told they do not throw a check engine light.

Now we come to the crux of the issue. Manufacturers have been installing longer o2 bungs for years to get around the rear temp sensor throwing a code, sometimes it works, sometimes it doesn't. You can trick the sensor directly instead, using a resistor I am fairly sure.

I thought the rear O2 sensor was just a confirmation that the cat is actually working, so as long as you have a working cat, and the rear O2 sensors have been fitted, you shouldn't be getting a CEL.

From memory, the extenders were useful for preventing a CEL if you use test pipes (no cat), as they get the O2 sensor tip out of the exhaust flow and therefore don't correctly detect the exhaust contents.

I was told it is because more air is flowing through so it tricks the ecu that something is going wrong. I heard also that the Berks throw a check engine light, is this true in your case?

The CNT racing ones I enquired about have a extended bung for the sensor welded on so I was told they do not throw a check engine light.

No, not true. I have no CEL. Seems like there is a lot of BS floating around about HFC's....

Or by using uprev to disable the fault codes....

I would if I had the cash right now, later down the track I will eventually get a tune, but right now I'm just looking to change the cats as they are broken and making a really annoying noise.

No, not true. I have no CEL. Seems like there is a lot of BS floating around about HFC's....

On g35driver, it seems some people have CEL on and some people don't with the Berk HFC's....so I was just wondering why was it that some cars threw CEL's and some did not....

Also, I've looking on Z1 motorsports, they are selling Berks for $495, not inc shipping which I guess would be another $100 or so on top, so $595 total, out of my budget.

I'm really looking for the CNT Racing ones, shipped around $400... does anyone use any other US vendors to buy their parts from??

Or does anyone know where I could fabricate a pair of HFC's for under $400 in Melbourne?

Or is anyone selling their stock cats/ aftermarket cats ???

The tight wad option is to punch the cat's out and ignore the light.

I could make them from stainless but like I said, the high flow 100cpsi cats alone are $300, plus getting stainless flanges laser cut. There is no way anyone could do them locally for under $400 unless they cut major corners, as CNT must have done do deliver them for that price.

Tried the wreckers?

I would if I had the cash right now, later down the track I will eventually get a tune, but right now I'm just looking to change the cats as they are broken and making a really annoying noise.

On g35driver, it seems some people have CEL on and some people don't with the Berk HFC's....so I was just wondering why was it that some cars threw CEL's and some did not....

Also, I've looking on Z1 motorsports, they are selling Berks for $495, not inc shipping which I guess would be another $100 or so on top, so $595 total, out of my budget.

I'm really looking for the CNT Racing ones, shipped around $400... does anyone use any other US vendors to buy their parts from??

Or does anyone know where I could fabricate a pair of HFC's for under $400 in Melbourne?

Or is anyone selling their stock cats/ aftermarket cats ???

I would be questioning what other mods have been done and if there were any issues when refitting the sensor or even how it was handled during the upgrade.

I got mine through Concept Z Performance and the cats are very high quality (especially for American parts).

I could probably sell you my stock cats if you want a set. They are roughly ~55,000kms old. PM me if you are interested.

Concept z quoted me 550 delivered and then 600 delivered when I used a different email to get a quote lol.... Pretty dodgy.... If I get the berks I would probably get them from b2auto who quoted me around 500 delivered... However I would still much prefer to get the Cnt racing cats which upon doing some research, seem to be a good quality cat at a good price.

But I've pm'ed you anyway regarding your stock cats...

I installed Berks HFC on my 370gt coupe a couple of weeks back, no CEL, when i got them from the US i was amazed at the quality of materials used (SS) and workmanship in making them, i would absolutely recommend them. They are more expensive than some other brands like kinetix but definitely worth the extra cash!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...