Jump to content
SAU Community

Recommended Posts

a bit of fishing line and some 'bug/tar remover' to get rid of the adhesive and you should be fine.

Personally I don't like the debadged look, it makes me think 'dodgy backyard repair job', but each to their own. Certainly better than having badges in the wrong spots as I have seen on some cars.

I had my badges taken off when i had my boot resprayed from a scratch. At first i liked the debadged look but i kinda want the badges on again.

Problem is, im pretty anal about getting the badges back in the right spot and straight. There doesnt seem to be any information in regards to the exact positioning of the badges :ermm:

If you're going to remove the Skyline badge you may as well get rid of the 350GT i don't think the nissan badge and the 350gt badge without the skyline would look good at all. I prefer my car debadged front and rear, only because these are rare cars and not many people know what they are.

I have heard that if you de-bdage the big nissan badge on the boot, it leaves a mark?? Like a outline of the badge....

can anyone confirm this?

Depends on what color the car is, i have personally seen those outlines you talking about but it was on a Red v35 (very prone to fading) but other colors might be a different story.

doesn't bug/tar remover get rid of that residue? when i bought my car the previous owner looked like he literally attacked the rear nissan badge with a screw driver and left a long/deep scratch where it was.. got the boot resprayed the painted removed the other badges for me.

This is how mine looks, dirty with a boot lip too.

This is after a detail, since removing the skyline badging reveals slight indentations where the lettering used to be.

I used fishing line and bug and tar remover that was in a green spray bottle but never again because it slightly stained the paint, another reason why I had the car detailed.

post-105738-0-64659500-1370235619_thumb.png

Edited by Triggs
  • Like 1

doesn't bug/tar remover get rid of that residue? when i bought my car the previous owner looked like he literally attacked the rear nissan badge with a screw driver and left a long/deep scratch where it was.. got the boot resprayed the painted removed the other badges for me.

I'm not talking about the glue residue, what I'm talking about is the slight indents the "NISSAN" badge will leave after removal.........

does anyone else have this issue after they debadged???

This is how mine looks, dirty with a boot lip too.

This is after a detail, since removing the skyline badging reveals slight indentations where the lettering used to be.

I used fishing line and bug and tar remover that was in a green spray bottle but never again because it slightly stained the paint, another reason why I had the car detailed.

You can't really see it in the photo...so I guess a cut and polish helped you remove the indentations?

does it really leave 'indentations'? or is it just an outline because that part of the paint hasn't seen the sun over the last 10 years?

I wouldn't have thought Nissan would 'indent' the panel for the badges?

I definitely think it looks much cleaner without the skyline wording attached to the boot.

I will attempt to give it ago on a v36.

Anyone done one on a v36?

My V36 is debadged, both the nissan and skyline badges are gone.

292497_10151482112449912_314936203_n.jpg

Got mine off with a heat gun on very low to warm up the glue, then rubbing in small circles with a white cloth and some eucalyptus oil. (I stress white cloth as I used a green microfiber first and it actually transferred color into the paint - had to cut n polish it out with some pretty aggressive compound).

post-22161-13703388815778_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Absolutely could be. I collected data logs from when the O2 sensor was still out and also after I had replaced it so will try to compare them. Pretty confident that the affect is lowered with the new sensor, will check logs at the same RPMs/conditions. 
    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
×
×
  • Create New...