Jump to content
SAU Community

Recommended Posts

I have recently bought a 96 import r33 gtst and i am having some problems, firstly being boost, the stock boost gauge just barely gets past 0 at the high end of the rev range (cant see exactly because tacho is not working atm which is another story).

The other thing which could be related is there is a high pitch whistle noise which doesnt sound right at all which sounds like its coming from around the turbo when it gets to high revs. I cant see any apparent split hoses, could this be a leak on the manifold side?

Any advise would be much appreciated before i start dismantling on the weekend.

Hmm no its a different noise, it wont get close to boost till high revs and then it starts making the noise and will get to maybe +1 mm/hg at the most.

Ill have to get a vid of it tomorrow and post it up.

No the car wasn't exactly cheap. Tonight i disconnected the bottom vacuum line from the stock solenoid and i seemed to make 6-7 psi, was about half way from 0 to 7 mmhg. I also got a clip of the noise:

Sounds like a fat exhaust leak. Check for obvious visual signs. You should see black carbon deposits n shit from where the leak is. Since you said you aren't making boost, I'd check for the obvious signs around the manifold to turbo gasket. Then check turbo to dump pipe. Mine made that exact same sound. The metal gasket between the turbo and dump was split from reuse. Don't get those paper kind of gaskets, those two shiny things on the black shit. They are shit, piss weak and don't last. Get the proper metal gasket. I don't think a failing turbo would emit that sound. My car when I got it had surprisingly loose mani to head nuts. I tightened those up quick fast.

hmm, i was going to pull it all apart this weekend but i cant get the replacement gaskets till after monday through nissan. Thanks for the info, might pull a few things out of the way and have a look for signs of a leak as you say. Not that i can see it very well but i think there is a broken stud on the manifold to head too.

It sounds to me that it's not an exhaust leak. Probably the Turbo is gone but also check the Blowoff valve to see if it's fallen loose. This happened to me and turned out the BOV had given way over time.

  • 3 weeks later...

All the nuts on the turbo to manifold were loose, i tightened them up and ordered a new gasket. Would this be enough to cause complete lack of boost or is it likely to have a boost leak somewhere as well? car seems to be running very rich especially at idle.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Small update for the day... Turns out the intercooler and engine coolant hose kits are anything but complete....I probably should have counted better but it only really covers about half the coolant hoses in the car, it really just covers the visible stuff and pretends everything else doesn't exist (turbo water feed and returns and also heat exchanger lines through the 2 pumps and cooler) .In any case, I'm happier to have half reliable hoses than none, but a bit of a disappointment. Anyway...finger click (and 5 hours).....hoses in place, lots of spring clamps replaced with screw clamps, and engine coolant is on the pressure tester for the night.   Incidentally, upsized header tank is an Inifiniti factory option....not sure I'll ever do prod car racing in this but at least it is legal.
    • Just weld it onto the hot pipe. If you want it right after the turbo, put it right after the turbo. Or rip the comp cover off and drill and tap a hole into it.
    • hahaha glad I can rely on you two to go on a spiral at the drop of a problem! Some quick answers....the ducting is excellent top bottom and sides....everything that gets in goes through the coolers (noting the oil cooler redirects it out again, fair call if it is cooling 120o+) and the heat exchanger for the intercooler also has some scoops to pick up more than it's fair share too. I can't see going down the water spray track....no bueno for formal racing and a big risk for long rally days if you run out (plus I'm not clear if it is allowed there either yet).   Frankly, it must be possible to reliably put 400kw through a standard front end, the BMWs do it so I just need to work it out....I'm starting with reducing blockages in the way and adding some coolant capacity with a bigger header tank, flushing rad and making sure it was filled/bled properly (I didn't do the last coolant change); also taken measurements incase next step is a bigger/higher capacity custom radiator
    • wow, a completely stock GTR! I've got to admit, I have no idea from what you are describing....do you have  any idea where the "thump" comes from, and are you certain it is the HICAS light not something else like the cat overheat light?
    • nice work, welcome to the world of CAD! fabricating accurately in 3 dimensional space is beyond me....I almost always end up making something more than once...sorry I mean I extensively use prototyping
×
×
  • Create New...