Jump to content
SAU Community

Recommended Posts

This R33 GTR V spec makes 394.9kw @ at all 4 wheels with a low 16 PSI on 98 pump fuel.Able to make well over 450kws at all 4 wheels
with more aggressive tune.

Below are some of the mods performed to the vehicle.
-Fully built engine with forged internals(under 3000ks old).
-T78 turbo(running 16psi able to run over 26psi).
-HKS cams/cam gears.

-External waste gate/screamer pipe.
-Large injectors.
-Extra fuel rail.
-Oil relocation kit.
-Oil breather tank.
-N1 water/oil pump.
-Bosch external fuel pump.
-Greedy radiator.
-Large intercooler/oil cooler.
-Braided lines.
-3.5 inch exhaust system.
-Adjustable coil overs suspension.
-Trust 7ltr oil sump.
-Reconditioned 5spd gearbox.
-Triple plate clutch.
-Volk 19" racing wheels with 19/30/275 tyres.
-Haltech Pro computer.
-Apexi AVCR electronic boost controller.
-Stereo system.
And much more...
All work and tuning performed by Peter at Advan Performance Centre.

All inspection by appointment only. No joy rides but happy to take genuine byers for a local drive.

This vehicle will not disappoint. $ 35,000 ono.

Regards,

Michael(0404 086 086)

Link to comment
https://www.sau.com.au/forums/topic/427009-r33-gtr-v-spec-400kw-wheels/
Share on other sites

  • 8 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...