Jump to content
SAU Community

Recommended Posts

Will only need your car for one day.

He needs mine for the extra day for jig making purposes.

  • 3 weeks later...

It's all systems go.

I dropped in to see him today while in Ringwood looking at bikes and he's still ready for my car so by Friday arvo it'll be fitted with a towbar!

If you haven't already, get in and book a time to get yours done.

And it's done.

I haven't had the chance to crawl under the car yet, but from what I can see it's a fantastic job. Extremely neat and well tucked up under the bar. I'll try and get some pics tomorrow.

The jig is made so he can bang these out on demand. $550 fully fitted but sans tow ball, so you'll need to add that on top. That represents a savings of $220 over a one off.

Here are some crappy phone pics.

I'm very happy with the job he's done. It certainly looks sturdy.

post-69546-0-84990000-1376388921_thumb.jpg

post-69546-0-21333000-1376388942_thumb.jpg

post-69546-0-22258500-1376388958_thumb.jpg

post-69546-0-12377800-1376388972_thumb.jpg

post-69546-0-51557000-1376388981_thumb.jpg

post-69546-0-54005700-1376388996_thumb.jpg

post-69546-0-15131100-1376389010_thumb.jpg

  • Like 1

Not the ball. I have a feeling he just forgot mine and for $13 from Repco I'm not exactly going to cry over it. Everything else, removable tongue, square plug etc included.

  • Like 1
  • 3 weeks later...

So, anyone else had a towbar fitted yet?

Thoughts? I actually used mine on the weekend. I felt so manly!

  • 1 month later...

Hi guys I am in WA and would be keen on getting this type of setup on my C34. anychance on getting one sent here and putting it on myself or recommending someone to install?

  • Like 1

Give Des a call - (03) 9879 3545 - and ask. You'll need to find someone to fit it, if you're not able to. I can't see that costing much. There's maybe a couple hours in fitting.

  • Like 1

Getting mine done next month hopefully when time permits.

Just spoke to Des, call a week or two beforehand to book and it'll take about 2-3 hours on the day.

Can't wait!

  • 4 months later...

I've had mine since this thread was forgotten about, pretty much. Hasn't fallen off yet !

I've moved house twice, towing my Karting box trailer chock-a-block full of whatever would fit. Hasn't missed a beat.

Best of all - the tailgate clears the tow-hitch handle by about 70mm, so you can always get into the boot.

Good times guys, good times.

Good to hear. That makes three that I know of who bought one from Des, which I think is the point which made it worth while to actually make the jig.

Any of you guys towed a car with Des's towbar yet? Am yet to try it out.

Not a car, just a 6x4 with some camping gear thus far and a 6x4 with about 700kgs of sand in it. Did it easy.

I won't be towing a car any time soon but I am looking at buying a 8x5 dual axle tipper which should carry a couple of tonnes, so that'll give the Stag a workout.

  • 1 month later...

Can any people who had one installed describe what modification is done to the car in order to fit the bar? I am in Canberra and would be interested in one, though I might have to get it locally fitted, or DIY if possible.

My photos further up show it all. A couple of holes drilled and a small square cut out of the rear bar. There's really not much to it.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...