Jump to content
SAU Community

Recommended Posts

1st time at the drags and definately first time in the GTR. It was at the Race4Real event at Eastern Creek.

Had 3 runs. First 2 runs, I had it in R mode and it didn't click to me that I had to have it with VDC off. Only managed a best of 12 seconds flat :unsure:

Last run, turned VDC off and ran a 11.2. Should have a bit more as launch was rushed and definately wasn't 100%

Will be back next week and hopefully crack flat 11s/high 10s

Car currently has 360KW atw. Midpipe, Catback, Intakes and Tune. Also running 275 and 335 tyres.

Link to comment
https://www.sau.com.au/forums/topic/427307-went-to-the-drags-last-night/
Share on other sites

What year model is yours and my best run was 11.24 I own a 2011 only had k&n panel filters and all in R mode. I now have a mines midpipe and am going to eastern creek next Wednesday also looking at getting a Ecutek tune as I watched a clip of there BOTL (boost off the line) and it hooks up really well instead of bogging down that tiny bit on launch 60" times were smashed from standard launch

this is one of my runs - pretty non-eventful though lol

10.81 on 21" yokohama street tyres with a fair bit of slip and short shift into 2nd

will be going back soon in the cooler weather with my stock 20s to knock a few tenths off

http://youtu.be/DQnO0Mgfvko

  • Like 1

This is one with VDC ON lol

Here is one with VDC OFF

You guys running Auto mode or Manual mode? I only had one run with VDC OFF in Auto mode. I will try VDC OFF and manual mode next week.

Lol i dont think Vtec kicked in yo for the honda ;)

It gets off the line so well though! Good work... Looked like a quiet night there?

Yeah, was quiet. But very slow. A few of the ealier cars kept spilling liquids on the track which put a stopped to things for a long while.

Yeah a bit disappointing... Was that what caused you to only have 3 runs?

domino_z, was that run with you on E85 or before?

that is my current state of tune - e85 @ 420 awkw

that run was vdc-r lc5 @ 4000rpm irc - i have around 5 diff maps at varying launch rpms from 2500rpm to 4500rpm

ive ran in auto and manual mode, auto is slightly quicker but iirc i grabbed 2nd myself on that run as it just spun too much in 1st

i'd love to be able to go run after run trying diff techniques, but early this year it was just far too packed and far too hot waiting in line - i could prob get a tenth more out of these tyres by modulating the throttle in 1st, but it'd be easier just to put my stockies on the back and chase maybe 2-3 tenths

i use my lc with vdc-r otherwise it's just too much wheelspin on these yokohama v103's. i will upload the lc5 vdc-off next time i go with my stock tyres as ill have a fair bit more grip

this was the first time we went at start of the year

temp was rediculous - the wait time was around 2hrs per run and we were cooking with no shade and high 30s track temp

my fastest run is at the end of the vid, 10.9 with aircon on max because i was dieing by the time i got to staging

What were your 60" times Domino I was getting 1.856 at 127mph 11.24s are any of you's heading to eastern creek on Wednesday night it would be good to see a few more down there rather then just mine

I'll probably go again this coming Wednesday. Should be quiet as State of Origin is on I think.

Awesome I'll see you down there I will be there with a few mates in there Evos and that's what I was thinking so hopefully we get a fair few runs I've never had a run at night only through the day when it has been really hot and humid so it would be interesting to see if if makes much of a difference :)

I took the GTR out for the first time on Wed night and was a little disappointed not to crack a 10 sec pass. Best was 11.05. Mine's also got 360awkw's.

The main issue was the launch. I'm also getting 1.8 60fts, but these things should be doing heaps better surely. I get high 1.5's in my 2 tonne barge (5.0 supercharged FPV with 420rwkw's).

I'm guessing I need to fiddle with the launch control? It seems to hesitate just for a split second on take-off at the expense of a good 60'.

ATM launch I've got LC5 flashed in.

Any advice guys? Heading back out to Willowbank on Saturday arvo.

Been reading on NAGTROC

They recommend using comfort mode and to decrease tyre pressure to about 28psi

I had several runs and was also told to have comfort mode on but noticed that I was getting better times with all in R mode and I had 31psi last time and went pretty good... You still going there Wednesday night?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
×
×
  • Create New...