Jump to content
SAU Community

Recommended Posts

Also i didnt want to start a massive debate over that comment but i did an aftermarket fuel pump replacement when i had my 33, had the bosch 040 put in and it didnt raise pressure all i wanted to know was what a good option for the 34 was.

Nismo drop in. Or a e85 400lph walbro will do the job Thetis drop in models for skylines on eBay for around $200ish. There is a 450-460lph version swell that's drop in. You may as well go a e84 friendly one for the future. :)

Cheers josh

Edited by Joshbigt62r

Nismo drop in. Or a e85 400lph walbro will do the job Thetis drop in models for skylines on eBay for around $200ish. There is a 450-460lph version swell that's drop in. You may as well go a e84 friendly one for the future. :)

Cheers josh

pretty sure the e85 pump is not drop in. I have one, it is in but took some mods as it is a fair but bigger than the actual drop in pump, and it draws heaps more current.

I know the nismo pump is 100% drop in. The e85 460lph walbro make not be direct drop in but it is a intank fuel pump still. And still can be a drop in with a bit of basic mucking around. So yes it is a drop in fuel pump still as if drops into the tank. Just not a DIRECT drop in as the nismo pump is. keep in mind though the walbro is basically hAlf the price of the nismo.

Cheers Josh

Don't use the 040, the filter is prone to clogging and it is an old clunky design.

The Walbro 460L is overkill if you aren't tuning the car, even a Walbro 342 is more than you need, only costs $100, but still requires hard wiring the power.

I would be keeping the stock pump until you decide to tune it.

Don't use the 040, the filter is prone to clogging and it is an old clunky design.

Chunky yes... I dont know why people use the 040 over the 044 as i ran an 044 with barb on the end and the original style fuel sock on the bottom of the tank, should solve that clogging issue... Worked perfectly and surprisingly wasn't loud! I blamed it for my fuel issues but it ended up being the injectors! I still run that same pump today but its now in the boot due to the external setup.

What does a 040 flow and what's a 044 flow? Sweet f all compared to the new walbro's

A single 044 got me too 350kw on an intank setup! How much power do you want to make? lol

I've got a single 044 that has been made to be a drop in. From memory I had to modify my cradle to make it a drop in. I put that in probably 5 or so years back. If I were to do it today I'd just use a walbro e85 friendly pump. Well plans are for me to make 400kw if I can. So I'll need to upgrade my pump. If memory serves me right the 044 flows 300lph but I could be wrong. 5+ yrs back memory not so great from regular weekend alcohol abuse haha. I'm more than likely still going a hta 3076r or 3582r on my built 25. Unless stao can come up with something pretty similar. Prefer to support a local bloke if I can. But FP hta just seems the ducks nuts at the moment lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...