Jump to content
SAU Community

HELP!!! defected again and first EPA.........


Recommended Posts

Guest INASNT

LOL

Welcome to the canary club!!!! :D

As said before youe only allowed one intake mod, FMIC or Pod, and most times you need an non-oiled based paper type pod to be 100% safe when you do the test. When they do the dB test they will rev ur car to 5000rpm as thats what they are meant to coz its 75% of the power band. For the emmision test they will also stick a probe on ur cat and check its operating temperature.

Dont stress to much as the epa guys aint like cops, and they are actually preety easy to talk to and long as ur car looks preety stock they will pass you.

I think ronin09 still has his stock cat back system, which i borrowed about 1 year ago when i had my day at mcloud.

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

Boys I'll tell you a legal loop hole.

Call the EPA and say you have sold the car. You can say the transfer papers are yet to be processed. I would say you do not have contact details of the new owner and therefore can not pass pon the message. They wont have time to follow up on your story.

If you dont like this idea I have stock front pipe and stock BOV

Adzmax: writing that on a publicly watched forum is just silly. Not all law enforcement people will know that info - you are helping spread it! Thanks :(

This guy has an R33 gtst with aftermarket hid's which are probably legal so please edit your post :D

Are you for real?? As if they don't know that already and I think you'll find they are not. Do you think the whole of the Victorian police force has nothing better to do than surf these forums to get their information?? In any case I'll edit it just for you.

Thanks for editing, but if you disagree with me then put it back. I am not the forum police.

Real Police do watch forums.

A lot of police dont have a clue about what is legal on cars and what isnt - you must know this? They just hand out fines because we are clearly not paying enough tax!

I know it is strange, but when the car came from Japan, it already got PFC and the SAFC. I don't know why the Japanese owner want to do that, but good for me instead.

more question, before I go to the EPA, I just unplugged the unit of the booster and  turbo timer and leave the wiring in the car, is that possible? car still can move? I know if unplugged the SAFC the car won't start.

Well take the SAF-C right out totally, here is your chance.

No, you cant leave all the wiring in the car, and just take the screens out.

That doesnt work.

You solenoids will still be in the engine bay, and the EPA will find them.

The EPA will also go right over your car if they see you have wires floating around as then know it's then modified and you'll fail.

As everyone has said. take everything off

Right down to the wiring for SAF-C, boost solenoids, pod (just for the hassle)

absolutely everything.

Nicky: where did you get the info for EPA rules etc. Only thing i saw on their website was related to like noisy neighbours.

Pawson: " know it is strange, but when the car came from Japan, it already got PFC and the SAFC. I don't know why the Japanese owner want to do that, but good for me instead."- i was under the impression your car had to be stock to be complied.

Curious to see more information regarding pods/fmic/etc. i heard there was some issue with oily filters, but k&n are sold legally at autobarn (or so my friend who worked there said).

with the SAFC, the wires are not in the engine bay. It connects directly to the ECU hidden on the passenger side. With the wiring of the SAFC, connect the standard yellow wires (air flow) and your car should start like normal. unplug all the other wires and connect back after the EPA test.

I got done recently, Fined $500, 3rd time in 9 months.

They tested my DB at 4800 rpm. They checked my ECU, and AFM as i ran a Link ECU. They said nothing about my Profec B which was simply unplugged or my turbo timer. If you have a FMIC you cannot have a poddy as stated before by other peeps.

True the 2 guys down there are good to chat with, but it burns me when their friendly to you but at the same time dicking around with your car and hand you a $500 fine. The slim fella with short hair greying on the side, said they tend to give us these fines as to them its justifable because we spend so much money on our cars!

  • 1 year later...

Somebody mentioned something about not having a Turbo Timer? I have an EPA test on my 32 GTST on November 10th. The car is pretty much stock apart from exhaust and frontmount. I'm not sure exactly how loud the exhaust is, but it isn't one of those 1s that rumbles all day long, pretty quiet on idle too. So basically, turbo timer must be removed for EPA testing????? :O

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
    • Should have taken that opportunity to slot in a twin scroll turbo setup. Maybe next time.
×
×
  • Create New...