Jump to content
SAU Community

Recommended Posts

Then there was also the unmarked copper heading up to the meet that jumped out infront of you

Agreed, the run home was also good.

I looked in my re-view mirror when we were towards the bottom of the putty and there's Terry, must of really "tested" the Evo on the way back :)

nah, those bikes held us up.

Then there was also the unmarked copper heading up to the meet that jumped out infront of you

Agreed, the run home was also good.

I looked in my re-view mirror when we were towards the bottom of the putty and there's Terry, must of really "tested" the Evo on the way back :)

Definitely the exception to the stereotype; let me tell you. ;)

Of course we didn't park anywhere... :whistling:

Asian drivers are really scary - even when we get things right! It's the stereotype that creates that terror :P

Don't worry Dale. I got your fingernail marks out with a heatgun :P

Nah srsly, we just about caught up until the red light punctuated our progress. Taheo was pushing me in the mighty Stag and I wasn't prepared to go over a certain speed being the lead car > just kept a tight line. Enjoyed it despite being wary of the blitz.

Here we go guys. Sorry it took so long to get up! (thats what she said)

Feel free to share it around if you deem it worthy of such. Make sure to watch in 720p!

Cheers,

Shaz

Edited by XS80ST

Here we go guys. Sorry it took so long to get up! (thats what she said)

Feel free to share it around if you deem it worthy of such. Make sure to watch in 720p!

Cheers,

Shaz

Watched it, loved it, shared it!! Worth all the editing mate! Rolling footage looked mint!

Was a great day! Thoroughly enjoyed it... apart from the bad roads to and from wollombi.. may need to scratch them next time.. sorry to everyone behind me during that section, it was very rough in my car and took it very slowly...

Pics and vid are awesome, great to see. Well done!

Was a great day! Thoroughly enjoyed it... apart from the bad roads to and from wollombi.. may need to scratch them next time.. sorry to everyone behind me during that section, it was very rough in my car and took it very slowly...

Pics and vid are awesome, great to see. Well done!

With your steam roller tyres you would be lucky if the Grand Canyon caused you an issue :P

With your steam roller tyres you would be lucky if the Grand Canyon caused you an issue :P

ha not really... i have the same issues as everyone, but because there so wide its harder to dodge them!

Thanks Terry. Good to get some positive PR for the club too. Hope you didn't mind me using the SAU logo.

Not at all mate! If anything we should be thanking you for promoting the club! Every bit helps and being attached to an epic video is a hell of a way to do it :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...