Jump to content
SAU Community

Rb25 Fuel Rail Ebay Spec. Which Fpr To Mount To Fuel Rail?

jamesdt

By jamesdt,
in Engines & Forced Induction

 Share

Recommended Posts

jamesdt Enthusiast

jamesdt

Posted
Posted

Need to get a top feed fuel for my rb25. Are the cheap ebay fuel rails any good or are they just rubbish? Pretty much need a rail and injectors that will clear my plazmaman plenum. Also which fuel pressure reg will I be best off using. I'd like to use something that can be mounted directly to the end rail if possible.

Injectors will need to support e85, running a gtx3076 turbo so will id1000's be best off or id2000's be to over kill? Or is there another top feed injector that's just as good as id's?

Thanks guys.

Aldawy Explorer

Aldawy

Posted
Posted

On eBay there was one that I seen, it was black , can't remember the name.

It had threaded ends for twin feed and return was in the middle on the bottom not the top. Top return hits all standard manifolds (were the middle bolt is for the pleanm would hit the return if it was on the top)

It also came in kits with Id injectors (1000 / 2000) and turbo smart fuel reg

They also sold it on its own ,injector size was 11mm and 14mm

I'll get a picture for you so you know witch one to look for

  • 2 weeks later...
34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

Need to get a top feed fuel for my rb25. Are the cheap ebay fuel rails any good or are they just rubbish? Pretty much need a rail and injectors that will clear my plazmaman plenum. Also which fuel pressure reg will I be best off using. I'd like to use something that can be mounted directly to the end rail if possible.

Injectors will need to support e85, running a gtx3076 turbo so will id1000's be best off or id2000's be to over kill? Or is there another top feed injector that's just as good as id's?

Thanks guys.

Get a plazmaman rail to match the plenum?

As for injectors, 1000's will get you to the turbo limit no problem so they will be fine! 2000's will also work!

I have a brand new black anodised proflow one here you could have cheap...

Ooh or do this!

jamesdt Enthusiast

jamesdt

Posted
  • Author
Posted

was just seeing if there was a cheaper alternative than the plazmaman rail that would still work perfectly well, i noticed in another thread some one had said these work. does any one know forsure??

http://goodiesdirect.com.au/index.php?route=product/product&path=81_88_90&product_id=405

i guess the only issue there is that there 11mm fuel rails so if i go and buy a set of id1000's with 11mm tops, if it doesnt end up fitting with this fuel rail and i have to go and buy a plazmaman fuel rail which is 14mm i dont think id be able to run the top hat adaptors on the injectors to convert to 14mm because of clearance issues

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...