Jump to content
SAU Community

Recommended Posts

Hey guys, newbie here! Sorry my first post is with a problem...I've search functioned this problem on here and haven't been able to find any new solutions as yet...

So here's the story. Since I bought my Stag ( C34 S2 RWD Auto) it's been having an intermittent misfire problem; the first I noticed was that on startup the Check Engine, TCS Off and Slip lights were all coming on. There was also a vibration I could feel through the steering wheel, felt like a slight misfire.

When I first bought it the guys from Redline told me it had been having this problem, but that they had replaced coil packs and plugs and it hadn't happened since. Well, it was still happening.

Since then I've taken it back several times, had the O2 sensor and AFM changed and a wiring loom problem fixed. The problem is less regular now but still happening, and if anything it feels like the misfire is getting worse (vibrations through the whole car now getting worse).

The misfire seems to go away after about 15 minutes of driving, but the TCS and Slip lights stay on (I assume this is because the ECU hasn't reset yet). At first I thought it was only happening when the engine was relatively cold, but a couple times now it's started missing halfway through a 30min drive.

When the miss is bad I can stand outside the car when it's idling and hear a popping from the exhaust. Driving-wise, when above about 2500rpm the problem seems to go away but there's a definite reduction in power. At idle through to about 1500rpm seems to be the worst, and it seems to resonate badly at a throttle position just above neutral throttle (exhaust resonating I think, as it vibrates through the rear of the car).

When throttle is applied in neutral, the problem isn't as bad as when driving. The vibration only really occurs at idle when it's in neutral.

I'm taking it back in again tomorrow to get the ECU checked out, but any ideas would be appreciated.

TL;DR version:

C34 RWD Auto: Intermittent misfire + check engine lights. Coil packs, plugs, O2 sensor and AFM replaced, wiring loom problem fixed. Still happening.


Edited by powerhearse
Link to comment
https://www.sau.com.au/forums/topic/429369-intermittent-misfire-problem/
Share on other sites

Are they brand new or what they had in the garge/workshop. I had the same problem less the light on dash replaced with 2 sets of coil packs from this mechanic, cracked the shits went and bought splitfires and has never happened again in 7 months.

Yeah sounds like could be cool packs , but check engine light should not be on . When you take it to them ask them what fault codes Ecu is throwing up and get them to reset .

I've run both splitfires and yellow jackets both are good coil packs

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...