Jump to content
SAU Community

Recommended Posts

Sorry to be silly ! But are you reading the boost of the ome gauge ?

I put a blitz return flow fmic and a 3inch JJR bell mouth on with a boost controller. It would spike to 14psi then it would drop down to maybe 12 11 psi.

I ran that for a year and it was all sweet !

Many would advise not run more that 10 psi !

@gts boy i was planin to put on a ebc and boost it upto 10 psi(had a drive just now).since its almost there should i go ahead with that mod?will runin it 12 sometimes be too risky?

my mods are full 3 inch xforce varex with split dump and k&n drop in filter thts it.

I wouldn't buy an EBC to raise the boost 1/2 a psi!! Not unless you can get one super cheap second hand. The only benefit you will get from fitting ANY boost controller at this point will be to keep the wastegate closed as it is coming on bost, which will make it feel MUCH faster even if it doesn't actually have any more total power up top.

12 psi is not risky at all. If it spikes up there every now and then (or realistically, even every time it comes on boost) you're not going to damage anything. The turbo will be fine - it won't shit itself at 12 psi any more than it would at 10. Sure, it could shit itself, but they're like playing Russian roulette anyway. The ECUs on R34s are a lot less emo than on R33s. They still tend to get well rich and retarded, and if you try to run 12 psi boost all the way to the top end then it might start to feel a bit ragged and slow. I have recent posts (in the last week or so) where I describe setting up my boost controller on my Neo and what it felt like at various boost levels. My physical mods are similar to yours. Good exhaust, FMIC, standard R32 airbox but opened up at the inlet, Metal turbo intake. Meaning that your ECU's thresholds of emoness should be similar to mine.

You need to Nistune your ECU, get the turbo highflowed, get some injectors, a fuel pump and a Z32 and tune it up towards 250 rwkW to get any better results than where you are now. A tune on the standard ECU and fuel system (maybe upgrade the pump for safety) will nett up to 210-220rwkW on a Neo, which is pretty good, but you keep the risk of the turbo going poo.

Nistune prices? See the Nistune website perhaps. It really is that easy.

Also, I am tempted to send you to lmgtfy.com for my recent post. I will have to search for it. If I have to search for it, then you could just as easily seacrh for posts by GTSBoy with the term "boost controller" or similar. Like this http://www.skylinesaustralia.com/forums/topic/429587-720-denso-top-feed-from-rb26-fit-rb25-neo/?view=findpost&p=6952094

Nistune prices? See the Nistune website perhaps. It really is that easy.

Also, I am tempted to send you to lmgtfy.com for my recent post. I will have to search for it. If I have to search for it, then you could just as easily seacrh for posts by GTSBoy with the term "boost controller" or similar. Like this http://www.skylinesaustralia.com/forums/topic/429587-720-denso-top-feed-from-rb26-fit-rb25-neo/?view=findpost&p=6952094

lol!Next mod has to be shift kit for trans. They take a crazy amount of time to shift between gears. First mod for any auto should be shift kit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...