Jump to content
SAU Community

Recommended Posts

Hi everyone,

Would like to get a feel of what people are using in terms of oil coolers, sandwich plates in particular.

I'm quite sold on a 19 row for 4 hot laps, running Castrol Edge 10W-60 on approximately 300rwkw and

350rwkw+ when it's tuned for E85. Cooler to be mounted driver side behind indicator. Happy to be

advised otherwise if that is not sufficient.

I have not come across many sandwich plates that include the thermostat, oil temp + press sensor holes

and cooler line fittings all in one.

One that I have found is from MPR:

http://forum.twincam.org.au/topic/3392-oil-filtercooler-thermostatic-sandwich-plate/

Seems to be the go, but just wondering if there are alternatives.

Cheers

Michael

Link to comment
https://www.sau.com.au/forums/topic/430238-oil-coolers/
Share on other sites

Mine has the oil sensors and everything fitted to the block! It is the Genuine Greddy sandwich plate with Speedflow fittings, MSCN black braided lines and just a JJ core... Should be more pics and info in my build thread somewhere (Link is in my sig)...

This is not a perfect setup but works fine so far!

Link to comment
https://www.sau.com.au/forums/topic/430238-oil-coolers/#findComment-6969652
Share on other sites

Mine has the oil sensors and everything fitted to the block! It is the Genuine Greddy sandwich plate with Speedflow fittings, MSCN black braided lines and just a JJ core... Should be more pics and info in my build thread somewhere (Link is in my sig)...

This is not a perfect setup but works fine so far!

Similar to this?

http://www.rhdjapan.com/trust-greddy-engine-oil-block-adapter-type-e-57mm-51270

That is what Charles recommneded for me off the forums

Though Michael's one also has an inbuilt thermostat which is awesome

Link to comment
https://www.sau.com.au/forums/topic/430238-oil-coolers/#findComment-6969668
Share on other sites

Haha! Yeah I was just on your page 2 seconds ago! Neat setup!

Does it take long for you to get to temp on the street?

I would say thermostat is mandatory for me considering I'll still be driving the car on the street.

My friend with a 19 row with no thermostat and a piece of cardboard in front of the cooler takes quite a while to get to temp still.

Link to comment
https://www.sau.com.au/forums/topic/430238-oil-coolers/#findComment-6969681
Share on other sites

Haha! Yeah I was just on your page 2 seconds ago! Neat setup!

Does it take long for you to get to temp on the street?

I would say thermostat is mandatory for me considering I'll still be driving the car on the street.

My friend with a 19 row with no thermostat and a piece of cardboard in front of the cooler takes quite a while to get to temp still.

Mine runs a thermostat! It does take a while to get up to temp but it has a pretty good cooling system setup now ;)

I am due to replace my engine/coolant thermostat as the car has been running cold so i assume once that is all done it should all work together nicely!

Link to comment
https://www.sau.com.au/forums/topic/430238-oil-coolers/#findComment-6969698
Share on other sites

The Greddy one DOES have a thermostat?...

SPECIFICATIONS:
Application: Engine Side
Type: E (Standard Oil Cooler, Non-Relocation Type, Internal Thermostat)
Union: AN8, AN10, AN12
Center Bolt: 3/4x16UNF, M20xP1.5

A DIY cooler set up will cost less than or around $400.


$140 for Greddy Sandwich plate
$150-180 for 19 row Mocal cooler (I bought Mocal because its said that every cooler has been tested to hold 180psi before leaving factory)
$10 x 4 -10AN fittings from Torques UK

3m of black nylon braided hoses

The Greddy thermostat opens up fully at 80 degrees and I think slightly open before that. It is also been tried and tested by many and proven to be very good lol

Link to comment
https://www.sau.com.au/forums/topic/430238-oil-coolers/#findComment-6969742
Share on other sites

The Greddy one DOES have a thermostat?...

SPECIFICATIONS:

Application: Engine Side

Type: E (Standard Oil Cooler, Non-Relocation Type, Internal Thermostat)

Union: AN8, AN10, AN12

Center Bolt: 3/4x16UNF, M20xP1.5

A DIY cooler set up will cost less than or around $400.

$140 for Greddy Sandwich plate

$150-180 for 19 row Mocal cooler

$10 x 4 -10AN fittings from Torques UK

3m of black nylon braided hoses

The Greddy thermostat opens up fully at 80 degrees and I think slightly open before that. It is also been tried and tested by many and proven to be very good lol

Yeah sounds like a good combo!

I thought it was 86 degrees or something but that is pushing my memory and my memory is generally useless :P

Link to comment
https://www.sau.com.au/forums/topic/430238-oil-coolers/#findComment-6969746
Share on other sites

Yeah sounds like a good combo!

I thought it was 86 degrees or something but that is pushing my memory and my memory is generally useless :P

From my shitty memory, I thought it's 80 haha, but I know they slowly open up before it gets to 8x degrees.

Link to comment
https://www.sau.com.au/forums/topic/430238-oil-coolers/#findComment-6969748
Share on other sites

Charles saves the day

I can't read haha

Lol you cant read, we cant remember! Must be an SAU thing.....

But yes they do have a thermostat! The guys at Greddy were awesome to deal with too!

If you want to run gauges make sure you order the adapters for them (Where the blanking plugs are in the image on my thread)

Link to comment
https://www.sau.com.au/forums/topic/430238-oil-coolers/#findComment-6969756
Share on other sites

What gauges would you run? Because I already have oil temp on my MFD, then oil pressure on my cluster, is there anything else that's cool and worth installing? haha

Not in the oil block! Sounds like you have it covered.... I just ran the 3 factory location gauges with Oil Temp, Oil Pressure and Water temp!

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/430238-oil-coolers/#findComment-6969762
Share on other sites

Next project is to protect the back of the core from rocks from the front tyre.... And THEN try work out some ducting to get it some airflow as we ran it nice and high to keep it out of harms way.... I wanted to locate some of the vents that Andrew has in the front of his standard GTT bar but no luck so far! Looks like an aftermarket foglight surround or something but would be good as a small duct for airflow!

Link to comment
https://www.sau.com.au/forums/topic/430238-oil-coolers/#findComment-6969768
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...