Jump to content
SAU Community

Recommended Posts

If I'm doing a static burnout, the accelerometer shouldn't recognise any g forces apart from some slight vibration...

If I'm rolling along at 60 on a rough road, it'll also not detect any g forces apart from slight vibrations...

Unless I'm missing something, Accelerometers can't detect speed, so how would it know if its doing a burnout?

If I'm doing a static burnout, the accelerometer shouldn't recognise any g forces apart from some slight vibration...

If I'm rolling along at 60 on a rough road, it'll also not detect any g forces apart from slight vibrations...

Unless I'm missing something, Accelerometers can't detect speed, so how would it know if its doing a burnout?

Sorry, thought we were talking about going off road. Yes, detecting a burnout is a current issue I'm having. To an extent, accelerometers can detect speed. Acceleration (Gs or m/s^2) over time (seconds) will give you speed (m/s off the top of my head). When I do testing I'll have to see what the reading differences are like between say a burnout, and simply revving the motor. But since the accelerometer can detect acceleration and deceleration you can see if the car is static.

So, knowing that, we can possibly recognize if someone is doing a burnout. We take into consideration whether the car is static (making sure that acceleration and deceleration are equivalent - hence the car is stationary.) and if the car is static and there's a large amount of vibrations, it is possible that you're doing a burnout. Again, need to compare revving the engine to a burnout and see how clear the difference is between them.

yeah Accelerometers are accurate over very short periods of time, but not for car movement, even with a good quality high resolution 3-axis one. Too many variables... bumps, hills, etc...Even the most amazingly complex math in the world can't overcome that without additional assistance from a quality GPS signal or an ECU speed input...

ECU is just not feasible, end of story. I can't do anything about that, I'd love to use it, trust me, but I can't. GPS will be there.

Do you perhaps have ideas for other sensors?

Again, it would be awesome to tap into the ECU, but there's no way I can create comms systems for every bloody model out there.

Mandatory penalties are bullshit.

Murderers still get their day in court and judges are able to apply discretion, yet a victimless crime gets a set punishment regardless of degree.

People busted speeding should receive a penalty appropriate to the "crime"".

Edited by Cowboy1600

Mandatory penalties are bullshit.

Murderers still get their day in court and judges are able to apply discretion, yet a victimless crime gets a set punishment regardless of degree.

People busted speeding should receive a penalty appropriate to the "crime"".

If I could delete your post I would. This isn't a discussion concerning whether we believe in the types of punishments currently in place, so I'd ask you to refrain from trying to create such an argument.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Congrats on the career change!  I did something similar at the start of the year too, left IT / corporate after nearly 2 decades. Soooo when's the motor coming out for the spark plug change?
    • Hi guys, long time no post as per usual! It's been a busy year so far, the biggest thing being a new job.  After 28 years in the automotive industry I decided it was time for a change.  I was losing faith in the industry and where it's heading.  Now in a completely different industry (electrical) working for a company that manufacture water pump contollers.  Not as sexy as cars but it's an interesting,  challenging industry. I now don't work Saturdays which is a bonus!  It's still 50-55 hours a week but having Saturdays ack after 28 years of working them is awesome!   No news on the GT-R but i did decide to add some more JDM goodness into my life....           1990 300 ZX.  She's not perfect but for a 35 year old car she ain't bad!  Just going to tidy it up a bit and enjoy it.  It's currently auto but will start stockpiling everything for a manual swap. It WILL distract me even further from the GT-R but im hoping not for too long! It somewhat proves a 6'8" freak can fit in a 300 ZX.  Sort of...  I drove it home from the previous owners house in Melbourne via Black Spur and Merton Gap (2 awesome bits of Victorian twisty road) and it was amazing!  Handles so well!!!   I don't think it would be worthy of a full build page but I'll post up some of the upgrades here if anyone is interested?  Cheers guys!
    • End game is to: - Remove all the slop from old worn parts - Adjust setup so that the wheels actually fit and the car is drivable (currently it is not because of the extreme rubbing on the guards).   Progress over the last couple of days, removed the rear hubs! Next steps: - Buy bushings - Replace bushings/bearings on hub - Reinstall
    • Cracked deck  And other cam snap stuff   
×
×
  • Create New...